Tuner config for motorised dish

[sluggsy]

Hi there,could you help me out with a small issue.My dad has a vu+ duo with 0.8 m dish on a motor.He is using vix latest image.The dish is setup correctly and is moving to each sat correctly.What is the best way to config the tuners.e.g tuner A set just to 28.2e and tuner B ??.The problem at the moment is he can only watch / record one channel at a time.I know if for instance if he is watching sly uk then he can only watch / record that sat.How do i configure the tuners so he can watch one sat and record another channel on that sat.
thanks
sluggsy

[Stanman]

Do you have two cables from dish or just the one dish?

[sluggsy]

i have two cables going to each tuner with one dish

[Stanman]

Stick the fix one on A and motor on B.

[sluggsy]

so tuner a is fixed to 28.2e only.Tuner b to all sats and use usals? I have only one dish

[Rob van der Does]

Use advanced config, both tuners set to USALS, both tuners set to the same desired satallites.
Set tuner 2 to "second cable from motor".

[sluggsy]

ok i will try it out tomorrow.thanks for your advice