PDA

View Full Version : Driver 29.10.11 (Et9000)


Enzo
02-11-11, 18:54
Changelog:

-fixed vtuner non-auto bandwidth for DVB-T
-full hd framebuffer with bmem>=210M (fullhd skin support)

only for Linux3.0.3 based Images.

extract zip
copy to /lib/modules/3.0.3/extra/
reboot
Larry-G
02-11-11, 18:55
i would not load these drivers personally. a lot of people are suffering some serious problems with these drivers such as loss of video needing the box to be put into standby or rebooted all together before they can again get video back.
Sicilian
02-11-11, 19:59
i would not load these drivers personally. a lot of people are suffering some serious problems with these drivers such as loss of video needing the box to be put into standby or rebooted all together before they can again get video back.

We are still testing with these drivers, the video issues started before these drivers. They are NOT suitable for current public ViX image.
digi247
02-11-11, 20:05
AOK here loaded this morning and all is working 100% no problems at all
silverfox0786
02-11-11, 20:07
AOK here loaded this morning and all is working 100% no problems at all

you can load the drivers while vix 2.2 is installed but now you wont be able to reflash 2.2 or even reflash 2.2 after flashing pli 2.1 or clarke support 3.03
Sicilian
02-11-11, 20:08
AOK here loaded this morning and all is working 100% no problems at all

Loaded to what image?
digi247
03-11-11, 13:29
Loaded to what image?

I have just changed from the HDF 4.2 iamge to the latest DreamboxUK 2.1 and loaded the drivers on this watched a few hours of TV last night and no problems at all.
silverfox0786
03-11-11, 18:15
I have just changed from the HDF 4.2 iamge to the latest DreamboxUK 2.1 and loaded the drivers on this watched a few hours of TV last night and no problems at all.

both images use latest drivers as far as im aware

try loading vix 2.2 that wont load
digi247
03-11-11, 18:20
both images use latest drivers as far as im aware

try loading vix 2.2 that wont load

Correct 2.2 will not load now because HDF 4.2 and DreamboxUK 2.1 image are both based on the new Linux 3.03 and require the latest bootloader.
silverfox0786
03-11-11, 18:37
Correct 2.2 will not load now because HDF 4.2 and DreamboxUK 2.1 image are both based on the new Linux 3.03 and require the latest bootloader.

yes and this is why we add a small worning that if you are a regular vix user then be very carefull before you flash to try a new image as vix 2.2 wont reload onto it

but vix 2.3 will be fine not long now for release