How to flash a DM500HD via the browser

[Larry-G]

What you need to update the firmware:

You need a image for the DM 500HD that has the extension *. NFI.

Connect your Dreambox to your Switch / hub / router.

Turn off the dreambox, use the switch on the rear of the receiver.

1. Press the button on the front panel and hold it down with one hand Then turn on the Dreambox via the switch on the back with the other.
3. your Dreambox now get the next free DHCP IP address from your router.

Go to your Browser Firefox etc, Enter the Next IP address on your Router, if your PC IP address is 192.168.1.101 then the next will be 102 then 103 104 and so on

This screen will then appear

http://1.2.3.11/bmi/i68.servimg.com/u/f68/14/88/79/35/69108810.jpg

Select your Image

http://1.2.3.11/bmi/i68.servimg.com/u/f68/14/88/79/35/66867710.jpg

And select Flash.

==============



thats the same procedure i used to use on my DM7020 and it will work on the DM500HD.

[titan2]

BONJOUR l' l' ADRESSE IP ET 0.0.0.0. DE MA DREAMBOX 500hd v2 POURQUOI JE NE VOIE PAS d'image merci de votre réponse

[titan2]

Hallo die IP-Adresse und 0.0.0.0. Dreambox 500HD v2, warum ich nicht Bild TRACK danke Ihnen für Ihre Antwort

[Scottie]

It's not going on2 dhcp mode when turn on need help

[dbmx]

Have u got a network connection

[Scottie]

Have u got a network connection

Yes when u turn on the light stays green

[dbmx]

When I say have you got a network connection ,can you connect to box with dcc.
The box needs to be connected to computer using network to flash using network method