PDA

View Full Version : Triax TMM, 5x16 Cascade Multiswitch with O/P B Bar [PN:305396]



silverfox0786
09-10-11, 11:25
Triax TMM, 5x16 Cascade Multiswitch with O/P B Bar [PN:305396]

Here i have a TMM 5x16 Cascade Multiswitch which comes complete with O/P B Bar

This item is unused but i cannot say New as its been sitting in storage and has a few scratches on it but its defo never been used and in new condition in that respect

asking £150 Delivered for it

11633

silverfox0786
18-10-11, 19:22
Still available

silverfox0786
26-11-11, 01:54
Reduced to £125

Alanp
13-12-11, 18:54
Sorry for my ignorance but will this multiswitch allow me to use one satellite to feed say four Vu+Duo's as an example Thanks

silverfox0786
13-12-11, 19:01
thats ok alan

this will allow you to use 1 satellite to feed 16 inputs

that makes 8 duos or 16 solos/unos or 5 ultimos and a solo/uno all on satellite tuners

Alanp
13-12-11, 19:05
Would you accept £100 deliverd this is something I am looking for but just a little overkill for my needs ( so just to clarify you could feed all the above with just one quad lnb)

Larry-G
13-12-11, 19:10
Would you accept £100 deliverd this is something I am looking for but just a little overkill for my needs ( so just to clarify you could feed all the above with just one quad lnb)

you could have 16 feeds from a single lnb.

silverfox0786
13-12-11, 19:11
i will accept 100 mate as its just sitting here

just also to clarify you would need to use a quattro lnb not a quad lnb

if your using 28.2 east then its not too hard to setup just follow the colours on lnb against the inputs and set the pots

there is alot of info on the net if you decide on a self install

if not then all satellite installer know how to set these up (the pots on mine where setup by an installer so im not the best person to ask)

let me know if you still want it

Alanp
15-12-11, 13:54
Sorry for the late reply just been looking in to it was hoping there was a solution where the sat set up could left intact, My issue is my sat is on a 2M pole and my ladders wont reach that high ( my local sat installer wants to charge too much) they quoted me nearly £500 to motorise my dish) ouch ! if I had reasonable access I would be happy to give it try. Do you know of or can recommend a good sat installer for the Herts area

silverfox0786
15-12-11, 14:40
best place to look is what satellite magazine back pages

me personally is used a company called arieal force they are nation wide and mark my engineer was real nice did my whole dish and came back a second time for free when wind moved it all in at £72 that was £60 plus vat he even gave me his mobile number and said next time it moves call me direct

Alanp
15-12-11, 15:08
Thanks mate will look them up

Stanman
15-12-11, 16:01
Also drop Pedro a PM on a well know av site, his based in Manchester but does come down south.

silverfox0786
25-01-12, 02:25
sold elsewhere thread closed