View Full Version : Zapping Time
Hi iam using my sky card in my et9000 via oscam and dvapi i noticed that the channels take a long time to clear hd channels take longer than sd for some reason sometimes upto 12 secs.Ive tried both card slots and it does not appear to make any difference,has anyone got any idea how i can make the zapping quicker iam watching sky via tuner B and my channel master is using tuner A.ive tried switching the channel master to turner B and the other dish to tuner A but that didnt work at all thanks
silverfox0786
03-10-11, 14:06
check in webif configuration
and make sure in global
How do i check the web interface configuration please
silverfox0786
03-10-11, 14:13
go to webif of oscam
then click configuration
by default it will show the global page
a few lines down you will see Prefer local cards: its a dropdown mennu so set it to prefer
thanks it was set to local card so i guess i will have to live with it
Just some more on this strangely its appears that sometimes the zapping times are what you would expect and sometimes they are very slow,could this be caused by the card reader or something like that
Just some more on this strangely its appears that sometimes the zapping times are what you would expect and sometimes they are very slow,could this be caused by the card reader or something like that
I'm wondering whether it's actually a slowdown in the software itself ... as autotimer, by default, polls every 3 hours iirc. When polling, the box reactions slow down, and when changing channels, it isn't so fast to respond (originally, the box would not respond at all whilst doing an autotimer check, but andy put pauses in to allow the box to react, albeit slowly). In next version of vix, the pauses are more frequent, allowing the box to be more reactive, even when doing a timer check (just that the check takes longer to perform), so this will stop the problem. That's, if it's your problem in the first place :p (but since you say sometimes it works, others it doesn't, then I'm pretty certain that's the problem)
Zap time should be instant with your local card, have you added the caid in dvbapi file ?
Are you using a services file ?
Its all guess work with not knowing how you have it setup.
Hi yes i have caid in dvapi file ive not a service file but i have a server file, strangely if i switch to cccam its instant zapping
have you put the caid + ident of your card in oscam.server ?
Yes ive done that too
have you put the caid + ident of your card in oscam.server ?
what have you set the mhz + cardmhz to .
Did u read what I said about autotimer? Can u disable autotimer, and see if u still have the same problem?
Sent with Tapatalk
SMARTCARD CLOCK FREQUENCY: /dev/sci1 37500000
what have you set the mhz + cardmhz to .
Thanks pooface can you tell me how i do that please
Did u read what I said about autotimer? Can u disable autotimer, and see if u still have the same problem?
Sent with Tapatalk
SMARTCARD CLOCK FREQUENCY: /dev/sci1 37500000
this tells me that you are using cccam to read the card not oscam mate .
sorry bud i think this is it
mhz = 500
cardmhz = 500
ident = 0963:000000
group = 1
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 100
i think your problem may be that you have card reader settings in oscam & cccam .
if you intend on using oscam as your card reader the i suggest you hash out #boxkey + #SMARTCARD CLOCK FREQUENCY: /dev/sci1 37500000
in cfg file . then stop oscam , stop cccam , restart oscam , restart cccam . that should do it hopefully .
make sure in oscam.server you have these settings :
protocol = internal
enable = 1
device = /dev/sci1
detect = cd
caid = 0963
Thanks iam only running ocam and dvapi i # those lines but it made it no quicker sadly
i think your problem may be that you have card reader settings in oscam & cccam .
if you intend on using oscam as your card reader the i suggest you hash out #boxkey + #SMARTCARD CLOCK FREQUENCY: /dev/sci1 37500000
in cfg file . then stop oscam , stop cccam , restart oscam , restart cccam . that should do it hopefully .
Thats what i have now
make sure in oscam.server you have these settings :
protocol = internal
enable = 1
device = /dev/sci1
detect = cd
caid = 0963
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.