View Full Version : Transponder problem SR 30000
I've seen in several forums that the problem is solved with the firmware upgrade TS_pro.dat, I did so but that does not work for the frequency
Hispasat 1C 11731.00 H DVB-S2 8PSK 30000 3/4
Hispasat 1C 12012.00 H DVB-S2 8PSK 30000 3/4
Hispasat 1C 12092.00 H DVB-S2 8PSK 30000 3/4
only this transponder has been scan and ok
Hispasat 1C 12052.00 H DVB-S2 8PSK 30000 3/4
Any one have the same problem? and what can i do to solve this problem of scan.
thanks
silverfox0786
21-09-11, 16:58
not seen an issue u shure u upgraded properly
you need to flash the FPGA update to the receiver and the sr30000 problem will be no more.
http://www.world-of-satellite.com/showthread.php?9781-Notice-from-Vu-Vu-Uno-firmware-upgrade&highlight=fpga
I did the flash of two ways with USB and the Download, also with several image and the problem persists.
do it with the original factory image then reflash your chosen image.
Also tested with the image V5.11 and is the Same.
I will be grateful if you could test this transponder with a UNO Box.
silverfox0786
22-09-11, 18:22
Phoenix and myself have an UNO box and that's y we are explaining to you about the solution
I'm guessing yr not updating right or then not scanning channel properly it scanning a dead transponder
Sent from my iPhone 4 using Tapatalk
These transponders they not dead is the frequency of the Meo provider in Hispasat
Have you tested these frequency in your UNO box ?
Rob van der Does
23-09-11, 13:53
Done. Results:
Hispasat 1C 11731.00 H DVB-S2 8PSK 30000 3/4 OK, found 23 channels
Hispasat 1C 12012.00 H DVB-S2 8PSK 30000 3/4 OK, found 31 channels
Hispasat 1C 12092.00 H DVB-S2 8PSK 30000 3/4 OK, found 31 channels
Done. Results:
Hispasat 1C 11731.00 H DVB-S2 8PSK 30000 3/4 OK, found 23 channels
Hispasat 1C 12012.00 H DVB-S2 8PSK 30000 3/4 OK, found 31 channels
Hispasat 1C 12092.00 H DVB-S2 8PSK 30000 3/4 OK, found 31 channels
same results here, on a 80 cm dish. i would have posted earlier but was in hospital over night.
Rob van der Does
23-09-11, 14:12
...but was in hospital over night.
Oops, not related to these tests I hope??
Oops, not related to these tests I hope??
LOL no. severe tonsillitis but my blood pressure and pulse were dangerously high so they kept me in for observation.
Rob van der Does
23-09-11, 15:59
Oops, not related to these tests I hope??
LOL no. severe tonsillitis but my blood pressure and pulse were dangerously high so they kept me in for observation.
Hope you are better now.
I really got the impression you climbed into the dish to do a manual scan...... :)
Hope you are better now.
I really got the impression you climbed into the dish to do a manual scan...... :)
LMAO i'm daft but not that daft.
Rob van der Does
23-09-11, 16:03
LMAO i'm daft but not that daft.
Sorry for that :o
problems with 12360 H 29900 3/4 on Hotbird 13.
did FPGA upgrade.
did not help.
Rob van der Does
03-10-11, 08:47
But the original problem was with sr30,000 : your transponder is 29,900
I set the dish and now works correctly
thanks to all
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.