pmneo
19-09-11, 11:59
Hello!
I'm trying to get my Technotrend DVB-S2400 tuner to work with vix.
I've installed the modules and loaded them with modprobe:
dmesg:
dvb-usb: Technotrend TT-connect S-2400 successfully deinitialized and disconnected.
dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT-connect S-2400)
DVB: registering adapter 1 frontend 0 (Philips TDA10086 DVB-S)...
LNBx2x attached on addr=8
dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
usbcore: registered new driver dvb_usb_ttusb2
root@et5000:/dev/dvb/adapter1# ls
demux0 dvr0 frontend0 net0
But in Tuner config it's not shown.
I tried to use usbtuner:
root@et5000:/dev/dvb/adapter1# usbtuner -a 1
open device /dev/dvb/adapter1/frontend0
open device /dev/dvb/adapter1/dvr0
open device /dev/dvb/adapter1/demux0
open device /dev/misc/vtuner0
failed to open VTUNER: Invalid argument
/dev/misc/vtuner(null)
root@et5000:/dev/misc# ls
pvr vtuner0 vtuner1
I'm trying to get my Technotrend DVB-S2400 tuner to work with vix.
I've installed the modules and loaded them with modprobe:
dmesg:
dvb-usb: Technotrend TT-connect S-2400 successfully deinitialized and disconnected.
dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT-connect S-2400)
DVB: registering adapter 1 frontend 0 (Philips TDA10086 DVB-S)...
LNBx2x attached on addr=8
dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
usbcore: registered new driver dvb_usb_ttusb2
root@et5000:/dev/dvb/adapter1# ls
demux0 dvr0 frontend0 net0
But in Tuner config it's not shown.
I tried to use usbtuner:
root@et5000:/dev/dvb/adapter1# usbtuner -a 1
open device /dev/dvb/adapter1/frontend0
open device /dev/dvb/adapter1/dvr0
open device /dev/dvb/adapter1/demux0
open device /dev/misc/vtuner0
failed to open VTUNER: Invalid argument
/dev/misc/vtuner(null)
root@et5000:/dev/misc# ls
pvr vtuner0 vtuner1