View Full Version : Vu + Solo stuck on loading screen
Just got a shiny new Vu+ Solo, loaded with the latest Vix image, but I am unable to get past the loading screen. I can enter the menu, setup, scan etc but no picture other than the Vix loading screen. Then every so often I get a green screen with error logs and restart. The loading screen has been showing for over 2 hours now so it's not a case of being impatient.
Unable to post error logs on here as I can't even get into the system through my network although I have sent them via the blue button.
Have you setup the tuner correctly for your satellite dish? Have you scanned or transferred a set of Enigma 2 settings/bouquets to the receiver?
Sorry forgot to put in here that it was all set up when I received it and worked fine. It's only when I've come to switch it back on again that I get stuck at the loading screen.
Not quite sure what steps you've taken but I'd start fresh with a re-flash.
Guide to flash here http://www.world-of-satellite.com/showthread.php?1148-How-to-flash-your-VU-Solo-with-USB-stick
Latest VU+ Solo ViX image here http://www.world-of-satellite.com/showthread.php?9742-ViX-Team-VU-Solo-Image-v2.2.100-21-07-2011
Extra the files to the root of your usb stick formated fat32. So will be vuplus/solo/flash files. Then follow the flashing guide. Do not unplug the receiver or remove the USB stick until GREEN LED FLASHING IN ROUND DISPLAY WINDOW - NO FLASHING FROM LED ON USB
Enigma 2 settings/bouquets here http://www.world-of-satellite.com/forumdisplay.php?21-Enigma-2-Settings
Guide to send Enigma 2 settings here http://www.world-of-satellite.com/showthread.php?623-How-to-send-save-Enigma-Settings-to-the-VUDuo-using-DBEdit
Further to the above post this is hows the flash files should be in your usb stick formatted fat 32.
In the root of the USB stick.
vuplus/solo/ and three files called: - boot_cfe_auto.jffs2, kernel_cfe_auto.bin and root_cfe_auto.jffs2
Thanks, I wass anticipating that may be the next step and have already downloaded the image, formatted my usb and placed those files in the folders. Fingers crossed off to try and flash it now.
Ok all the above steps followed and completed. When I reboot I get the loading screen again. If I do an automatic scan I can pick up services on Hotbird 13.0E. After that nothing it just stays at the loading screen.
I have a motorised dish with dual lnb which I set to HB 13 with my Duo setup. I've then switched off the Duo and swapped the lnb to the solo. I'm using the Simple, Single transponder setup for this as the box is for a friend who has a fixed dish pointing at HB 13 is this where I am going wrong?
If I press the EPG button I get a blank EPG and when I press exit I get a crash log.
<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Fri Aug 19 12:12:20 2011</crashdate>
<compiledate>Aug 5 2011</compiledate>
<contactemail>vixlogs@world-of-satellite.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX_HD/skin.xml</skin>
<sourcedate>Aug 5 2011</sourcedate>
<branch>(no branch)</branch>
<rev></rev>
<version></version>
</enigma2>
<image>
<dreamboxmodel>dm500hd</dreamboxmodel>
<kernelcmdline>rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 console=ttyS0,115200</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vusolo
build_type=0
version=2.2.110
date=20110812141651
comment=ViX
target=9
creator=Team ViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to ViX for %h
ViX v2.2
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
t userbouquet.dbe18.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv
74 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe22.tv
151 entries in Bouquet userbouquet.dbe22.tv
loading bouquet... /etc/enigma2/userbouquet.dbe17.tv
32 entries in Bouquet userbouquet.dbe17.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv
43 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe20.tv
17 entries in Bouquet userbouquet.dbe20.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv
16 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3e.tv
127 entries in Bouquet userbouquet.dbe3e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe25.tv
0 entries in Bouquet userbouquet.dbe25.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv
66 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv
26 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv
112 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe27.tv
74 entries in Bouquet userbouquet.dbe27.tv
loading bouquet... /etc/enigma2/userbouquet.dbe29.tv
62 entries in Bouquet userbouquet.dbe29.tv
loading bouquet... /etc/enigma2/userbouquet.dbe28.tv
31 entries in Bouquet userbouquet.dbe28.tv
loading bouquet... /etc/enigma2/userbouquet.dbe7b.tv
8 entries in Bouquet userbouquet.dbe7b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe30.tv
482 entries in Bouquet userbouquet.dbe30.tv
loading bouquet... /etc/enigma2/userbouquet.dbe1d.tv
17 entries in Bouquet userbouquet.dbe1d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe31.tv
216 entries in Bouquet userbouquet.dbe31.tv
loading bouquet... /etc/enigma2/userbouquet.dbe33.tv
103 entries in Bouquet userbouquet.dbe33.tv
loading bouquet... /etc/enigma2/userbouquet.dbe34.tv
80 entries in Bouquet userbouquet.dbe34.tv
loading bouquet... /etc/enigma2/userbouquet.dbe35.tv
80 entries in Bouquet userbouquet.dbe35.tv
loading bouquet... /etc/enigma2/userbouquet.dbe36.tv
73 entries in Bouquet userbouquet.dbe36.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2d.tv
80 entries in Bouquet userbouquet.dbe2d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe37.tv
8 entries in Bouquet userbouquet.dbe37.tv
loading bouquet... /etc/enigma2/userbouquet.dbe38.tv
9 entries in Bouquet userbouquet.dbe38.tv
loading bouquet... /etc/enigma2/userbouquet.dbe39.tv
46 entries in Bouquet userbouquet.dbe39.tv
loading bouquet... /etc/enigma2/userbouquet.dbe40.tv
5 entries in Bouquet userbouquet.dbe40.tv
loading bouquet... /etc/enigma2/userbouquet.dbe32.tv
37 entries in Bouquet userbouquet.dbe32.tv
loading bouquet... /etc/enigma2/userbouquet.dbe47.tv
7 entries in Bouquet userbouquet.dbe47.tv
loading bouquet... /etc/enigma2/userbouquet.dbe41.tv
25 entries in Bouquet userbouquet.dbe41.tv
loading bouquet... /etc/enigma2/userbouquet.dbe42.tv
16 entries in Bouquet userbouquet.dbe42.tv
loading bouquet... /etc/enigma2/userbouquet.dbe43.tv
45 entries in Bouquet userbouquet.dbe43.tv
loading bouquet... /etc/enigma2/userbouquet.dbe13.tv
38 entries in Bouquet userbouquet.dbe13.tv
loading bouquet... /etc/enigma2/userbouquet.dbe4d.tv
87 entries in Bouquet userbouquet.dbe4d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe44.tv
47 entries in Bouquet userbouquet.dbe44.tv
loading bouquet... /etc/enigma2/userbouquet.dbe61.tv
33 entries in Bouquet userbouquet.dbe61.tv
loading bouquet... /etc/enigma2/userbouquet.dbe62.tv
193 entries in Bouquet userbouquet.dbe62.tv
loading bouquet... /etc/enigma2/userbouquet.dbe65.tv
142 entries in Bouquet userbouquet.dbe65.tv
loading bouquet... /etc/enigma2/userbouquet.dbe63.tv
268 entries in Bouquet userbouquet.dbe63.tv
loading bouquet... /etc/enigma2/userbouquet.dbe64.tv
11 entries in Bouquet userbouquet.dbe64.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6e.tv
99 entries in Bouquet userbouquet.dbe6e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6d.tv
56 entries in Bouquet userbouquet.dbe6d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe26.tv
0 entries in Bouquet userbouquet.dbe26.tv
loading bouquet... /etc/enigma2/userbouquet.dbe76.tv
23 entries in Bouquet userbouquet.dbe76.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3f.tv
0 entries in Bouquet userbouquet.dbe3f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5d.tv
0 entries in Bouquet userbouquet.dbe5d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5e.tv
0 entries in Bouquet userbouquet.dbe5e.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv
258 entries in Bouquet userbouquet.LastScanned.tv
73 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio
loading bouquet... /etc/enigma2/userbouquet.dbe0a.radio
0 entries in Bouquet userbouquet.dbe0a.radio
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio
74 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio
0 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.dbe41.radio
0 entries in Bouquet userbouquet.dbe41.radio
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio
214 entries in Bouquet userbouquet.dbe01.radio
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio
70 entries in Bouquet userbouquet.dbe07.radio
loading bouquet... /etc/enigma2/userbouquet.dbe08.radio
385 entries in Bouquet userbouquet.dbe08.radio
loading bouquet... /etc/enigma2/userbouquet.dbe19.radio
109 entries in Bouquet userbouquet.dbe19.radio
loading bouquet... /etc/enigma2/userbouquet.dbe02.radio
0 entries in Bouquet userbouquet.dbe02.radio
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio
0 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
11 entries in Bouquet bouquets.radio
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
couldn't open /proc/stb/misc/12V_output
[SETTING] getFlushSize= 0
[SETTING] getDemuxSize= 1540096
SyncTimeUsing Transponder
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-Semibold.otf...OK (Regular)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-SemiboldIt.otf...OK (Italic)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-Bold.otf...OK (Bold)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-BoldIt.otf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
cannot open /proc/stb/avs/0/input_choices
--> setting scaler_sharpness to: 0000000D
[OnlineVersionCheck] Schedule Enabled at Fri Aug 19 12:00:37 2011
[ePopen] command: ip -o addr
setLCDBrightness 25
setLCDBrightness 127
Activating keymap: Keyboard English
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language English
language set to en_EN
FIXME: request for unknown slot
FIXME: request for unknown slot
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[WebInterface] set language to en
[WebInterface] set language to en
[WebInterface] fallback to default translation for Webinterface
[WebInterface] fallback to default translation for Configuration for the Webinterface
[AudioSync] set language to en
[AudioSync] set language to en
[ViX] set language to en
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 720p rate: multi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[CrossEPG] set language to en
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> applying pep values
[NetworkBrowser] set language to en
[NetworkBrowser] set language to en
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[EPGImport] autostart (0) occured at 1313751644.81
[AutoTimer] Auto Poll Enabled
[SwapManager] autostart
[SoftcamManager] AutoStart Enabled
starting hotplug handler
It's now Fri Aug 19 12:00:44 2011
[timer.py] next activation: Fri Aug 19 12:02:24 2011 (in 99092 ms)
It's now Fri Aug 19 12:00:44 2011
[timer.py] next activation: Fri Aug 19 12:02:24 2011 (in 99017 ms)
[EPGImport] autostart (0) occured at 1313751645.01
[EPGImport] WakeUpTime now set to -1 (now=1313751645)
[EPGImport] onBootStartCheck
[EPGImport] WakeUpTime now set to -1 (now=1313751645)
[EPGImport] now=1313751645 wake=-1 wake-now=-1313751646
[EPGImport] starting import because auto-run on boot is enabled
[EPGImport] No settings [Errno 2] No such file or directory: '/etc/enigma2/epgimport.conf'
[EPGImport] using source /etc/epgimport/vix.sources.xml
[EPGImport] using source http://www.xmltvepg.be/rytec.sources.xml
[PowerManager] AutoStart Enabled
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Fri Aug 19 12:00:45 2011)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Fri Aug 19 12:00:45 2011)
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
[SKIN] Parsing embedded skin
setValue 95
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 95 95 (raw)
Setvolume: 4 4 (-1db)
[Trashcan] gotRecordEvent None None
[DebugLogCheck] Poll Started
[OnlineVersionCheck] Online check started (now=Fri Aug 19 12:00:45 2011)
[OnlineVersionCheck] Downloading RELEASE online version file.
[NTPSync] Poll Started
[SoftcamManager] Poll occured at Fri Aug 19 12:00:45 2011
[SoftcamManager] Timer Check Enabled
NEXT CHECK 1313773245
[OnlineVersionCheck] Next check at: Fri Aug 19 18:00:45 2011 (now=Fri Aug 19 12:00:45 2011)
RemovePopup, id = ZapError
[OnlineVersionCheck] No New online version found
[OnlineVersionCheck] No New online version found
[OnlineVersionCheck] No New online version found
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
poll: unhandled POLLERR/HUP/NVAL for fd 31(17)
playing 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.dbe31.tv" ORDER BY bouquet
no .meta file found, trying to find PMT pid
file not valid
alloc PVR
allocate demux
PVR source is not valid!
accel 8704 bytes
accel memstat: used=0 kB, free 3600 kB, s 0 kB
accel memory: 0
ConvertToHumanReadable: no or unknown type in tpdata dict!
!!!!!!!!!!!!!! PTS-Plugin: __evStart
resolved to PLAY
eDVBServicePlay::unpause
RemovePopup, id = ZapError
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'usbd0': {'dhcp': False}, 'usbf': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'ip': [192, 168, 1, 101], 'up': True, 'mac': '00:1d:ec:02:32:d3', 'dhcp': True, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'postdown': False}}
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
ConvertToHumanReadable: no or unknown type in tpdata dict!
[OnlineVersionCheck] parsing online version file.
job Components.Task.Job name=OnlineVersionCheck #tasks=3 completed with [] in None
[ePopen] command: /usr/softcams/CCcam.2.2.1
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
ConvertToHumanReadable: no or unknown type in tpdata dict!
ConvertToHumanReadable: no or unknown type in tpdata dict!
ConvertToHumanReadable: no or unknown type in tpdata dict!
ConvertToHumanReadable: no or unknown type in tpdata dict!
[CrossEPG_Auto] poll
It's now Fri Aug 19 12:02:24 2011
[timer.py] next activation: Fri Aug 19 12:04:04 2011 (in 99997 ms)
It's now Fri Aug 19 12:02:24 2011
[timer.py] next activation: Fri Aug 19 12:04:04 2011 (in 99995 ms)
It's now Fri Aug 19 12:04:04 2011
[timer.py] next activation: Fri Aug 19 12:05:44 2011 (in 99997 ms)
It's now Fri Aug 19 12:04:04 2011
[timer.py] next activation: Fri Aug 19 12:05:44 2011 (in 99994 ms)
It's now Fri Aug 19 12:05:44 2011
[timer.py] next activation: Fri Aug 19 12:07:24 2011 (in 99997 ms)
It's now Fri Aug 19 12:05:44 2011
[timer.py] next activation: Fri Aug 19 12:07:24 2011 (in 99994 ms)
[SoftcamManager] Poll occured at Fri Aug 19 12:06:45 2011
[SoftcamManager] Timer Check Enabled
[SoftcamManager] CCcam.2.2.1 already running
[SoftcamManager] Telnet info not allowed, can not check if frozen
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
It's now Fri Aug 19 12:07:24 2011
[timer.py] next activation: Fri Aug 19 12:09:04 2011 (in 99997 ms)
It's now Fri Aug 19 12:07:24 2011
[timer.py] next activation: Fri Aug 19 12:09:04 2011 (in 99995 ms)
It's now Fri Aug 19 12:09:04 2011
[timer.py] next activation: Fri Aug 19 12:10:44 2011 (in 99997 ms)
It's now Fri Aug 19 12:09:04 2011
[timer.py] next activation: Fri Aug 19 12:10:44 2011 (in 99994 ms)
It's now Fri Aug 19 12:10:44 2011
[timer.py] next activation: Fri Aug 19 12:12:24 2011 (in 99997 ms)
It's now Fri Aug 19 12:10:44 2011
[timer.py] next activation: Fri Aug 19 12:12:24 2011 (in 99994 ms)
action -> InfobarEPGActions InfoPressed
BOUQUET: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x1a22940> >
BOUQUET: 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet
action -> OkCancelActions cancel
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 768, in closing
AttributeError: 'NoneType' object has no attribute 'ref'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x1a1ee68>>,('OkCancelActions', 'cancel')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>
Try sending Vhannibal Hotbird settings http://www.world-of-satellite.com/showthread.php?2639-Latest-vhannibal-E2-settings/page12 post 117 Guide to send here http://www.world-of-satellite.com/showthread.php?623-How-to-send-save-Enigma-Settings-to-the-VUDuo-using-DBEdit
After your scan are you able to switch to say basic FTA channel like Rai1?
EPG will not populate unless you set the epg to import.
you are crashing because there is no epg data loaded for the screen to read, i will add to code to fix this crash, but you still need to grab epg data from somewhere,
i would recommend using CrossEPG and configuring it to use OpenTV on 13.0.
go to Setup --> System --> EPG --> CrossEPG, then choose Opentv and select 13.0, exit out back to main tv sceeen
then press blue, and choose Download EPG.
hope this helps.
andy.
Ok all the above steps followed and completed. When I reboot I get the loading screen again. If I do an automatic scan I can pick up services on Hotbird 13.0E. After that nothing it just stays at the loading screen.
I have a motorised dish with dual lnb which I set to HB 13 with my Duo setup. I've then switched off the Duo and swapped the lnb to the solo. I'm using the Simple, Single transponder setup for this as the box is for a friend who has a fixed dish pointing at HB 13 is this where I am going wrong?
If I press the EPG button I get a blank EPG and when I press exit I get a crash log.
<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Fri Aug 19 12:12:20 2011</crashdate>
<compiledate>Aug 5 2011</compiledate>
<contactemail>vixlogs@world-of-satellite.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX_HD/skin.xml</skin>
<sourcedate>Aug 5 2011</sourcedate>
<branch>(no branch)</branch>
<rev></rev>
<version></version>
</enigma2>
<image>
<dreamboxmodel>dm500hd</dreamboxmodel>
<kernelcmdline>rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 console=ttyS0,115200</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vusolo
build_type=0
version=2.2.110
date=20110812141651
comment=ViX
target=9
creator=Team ViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to ViX for %h
ViX v2.2
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
t userbouquet.dbe18.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv
74 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe22.tv
151 entries in Bouquet userbouquet.dbe22.tv
loading bouquet... /etc/enigma2/userbouquet.dbe17.tv
32 entries in Bouquet userbouquet.dbe17.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv
43 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe20.tv
17 entries in Bouquet userbouquet.dbe20.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv
16 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3e.tv
127 entries in Bouquet userbouquet.dbe3e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe25.tv
0 entries in Bouquet userbouquet.dbe25.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv
66 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv
26 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv
112 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe27.tv
74 entries in Bouquet userbouquet.dbe27.tv
loading bouquet... /etc/enigma2/userbouquet.dbe29.tv
62 entries in Bouquet userbouquet.dbe29.tv
loading bouquet... /etc/enigma2/userbouquet.dbe28.tv
31 entries in Bouquet userbouquet.dbe28.tv
loading bouquet... /etc/enigma2/userbouquet.dbe7b.tv
8 entries in Bouquet userbouquet.dbe7b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe30.tv
482 entries in Bouquet userbouquet.dbe30.tv
loading bouquet... /etc/enigma2/userbouquet.dbe1d.tv
17 entries in Bouquet userbouquet.dbe1d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe31.tv
216 entries in Bouquet userbouquet.dbe31.tv
loading bouquet... /etc/enigma2/userbouquet.dbe33.tv
103 entries in Bouquet userbouquet.dbe33.tv
loading bouquet... /etc/enigma2/userbouquet.dbe34.tv
80 entries in Bouquet userbouquet.dbe34.tv
loading bouquet... /etc/enigma2/userbouquet.dbe35.tv
80 entries in Bouquet userbouquet.dbe35.tv
loading bouquet... /etc/enigma2/userbouquet.dbe36.tv
73 entries in Bouquet userbouquet.dbe36.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2d.tv
80 entries in Bouquet userbouquet.dbe2d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe37.tv
8 entries in Bouquet userbouquet.dbe37.tv
loading bouquet... /etc/enigma2/userbouquet.dbe38.tv
9 entries in Bouquet userbouquet.dbe38.tv
loading bouquet... /etc/enigma2/userbouquet.dbe39.tv
46 entries in Bouquet userbouquet.dbe39.tv
loading bouquet... /etc/enigma2/userbouquet.dbe40.tv
5 entries in Bouquet userbouquet.dbe40.tv
loading bouquet... /etc/enigma2/userbouquet.dbe32.tv
37 entries in Bouquet userbouquet.dbe32.tv
loading bouquet... /etc/enigma2/userbouquet.dbe47.tv
7 entries in Bouquet userbouquet.dbe47.tv
loading bouquet... /etc/enigma2/userbouquet.dbe41.tv
25 entries in Bouquet userbouquet.dbe41.tv
loading bouquet... /etc/enigma2/userbouquet.dbe42.tv
16 entries in Bouquet userbouquet.dbe42.tv
loading bouquet... /etc/enigma2/userbouquet.dbe43.tv
45 entries in Bouquet userbouquet.dbe43.tv
loading bouquet... /etc/enigma2/userbouquet.dbe13.tv
38 entries in Bouquet userbouquet.dbe13.tv
loading bouquet... /etc/enigma2/userbouquet.dbe4d.tv
87 entries in Bouquet userbouquet.dbe4d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe44.tv
47 entries in Bouquet userbouquet.dbe44.tv
loading bouquet... /etc/enigma2/userbouquet.dbe61.tv
33 entries in Bouquet userbouquet.dbe61.tv
loading bouquet... /etc/enigma2/userbouquet.dbe62.tv
193 entries in Bouquet userbouquet.dbe62.tv
loading bouquet... /etc/enigma2/userbouquet.dbe65.tv
142 entries in Bouquet userbouquet.dbe65.tv
loading bouquet... /etc/enigma2/userbouquet.dbe63.tv
268 entries in Bouquet userbouquet.dbe63.tv
loading bouquet... /etc/enigma2/userbouquet.dbe64.tv
11 entries in Bouquet userbouquet.dbe64.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6e.tv
99 entries in Bouquet userbouquet.dbe6e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6d.tv
56 entries in Bouquet userbouquet.dbe6d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe26.tv
0 entries in Bouquet userbouquet.dbe26.tv
loading bouquet... /etc/enigma2/userbouquet.dbe76.tv
23 entries in Bouquet userbouquet.dbe76.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3f.tv
0 entries in Bouquet userbouquet.dbe3f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5d.tv
0 entries in Bouquet userbouquet.dbe5d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5e.tv
0 entries in Bouquet userbouquet.dbe5e.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv
258 entries in Bouquet userbouquet.LastScanned.tv
73 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio
loading bouquet... /etc/enigma2/userbouquet.dbe0a.radio
0 entries in Bouquet userbouquet.dbe0a.radio
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio
74 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio
0 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.dbe41.radio
0 entries in Bouquet userbouquet.dbe41.radio
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio
214 entries in Bouquet userbouquet.dbe01.radio
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio
70 entries in Bouquet userbouquet.dbe07.radio
loading bouquet... /etc/enigma2/userbouquet.dbe08.radio
385 entries in Bouquet userbouquet.dbe08.radio
loading bouquet... /etc/enigma2/userbouquet.dbe19.radio
109 entries in Bouquet userbouquet.dbe19.radio
loading bouquet... /etc/enigma2/userbouquet.dbe02.radio
0 entries in Bouquet userbouquet.dbe02.radio
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio
0 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
11 entries in Bouquet bouquets.radio
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
couldn't open /proc/stb/misc/12V_output
[SETTING] getFlushSize= 0
[SETTING] getDemuxSize= 1540096
SyncTimeUsing Transponder
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-Semibold.otf...OK (Regular)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-SemiboldIt.otf...OK (Italic)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-Bold.otf...OK (Bold)
[FONT] adding font /usr/share/enigma2/ViX_HD/fonts/MyriadPro-BoldIt.otf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
cannot open /proc/stb/avs/0/input_choices
--> setting scaler_sharpness to: 0000000D
[OnlineVersionCheck] Schedule Enabled at Fri Aug 19 12:00:37 2011
[ePopen] command: ip -o addr
setLCDBrightness 25
setLCDBrightness 127
Activating keymap: Keyboard English
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language English
language set to en_EN
FIXME: request for unknown slot
FIXME: request for unknown slot
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[WebInterface] set language to en
[WebInterface] set language to en
[WebInterface] fallback to default translation for Webinterface
[WebInterface] fallback to default translation for Configuration for the Webinterface
[AudioSync] set language to en
[AudioSync] set language to en
[ViX] set language to en
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 720p rate: multi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[CrossEPG] set language to en
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> applying pep values
[NetworkBrowser] set language to en
[NetworkBrowser] set language to en
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[EPGImport] autostart (0) occured at 1313751644.81
[AutoTimer] Auto Poll Enabled
[SwapManager] autostart
[SoftcamManager] AutoStart Enabled
starting hotplug handler
It's now Fri Aug 19 12:00:44 2011
[timer.py] next activation: Fri Aug 19 12:02:24 2011 (in 99092 ms)
It's now Fri Aug 19 12:00:44 2011
[timer.py] next activation: Fri Aug 19 12:02:24 2011 (in 99017 ms)
[EPGImport] autostart (0) occured at 1313751645.01
[EPGImport] WakeUpTime now set to -1 (now=1313751645)
[EPGImport] onBootStartCheck
[EPGImport] WakeUpTime now set to -1 (now=1313751645)
[EPGImport] now=1313751645 wake=-1 wake-now=-1313751646
[EPGImport] starting import because auto-run on boot is enabled
[EPGImport] No settings [Errno 2] No such file or directory: '/etc/enigma2/epgimport.conf'
[EPGImport] using source /etc/epgimport/vix.sources.xml
[EPGImport] using source http://www.xmltvepg.be/rytec.sources.xml
[PowerManager] AutoStart Enabled
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Fri Aug 19 12:00:45 2011)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Fri Aug 19 12:00:45 2011)
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
[SKIN] Parsing embedded skin
setValue 95
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 95 95 (raw)
Setvolume: 4 4 (-1db)
[Trashcan] gotRecordEvent None None
[DebugLogCheck] Poll Started
[OnlineVersionCheck] Online check started (now=Fri Aug 19 12:00:45 2011)
[OnlineVersionCheck] Downloading RELEASE online version file.
[NTPSync] Poll Started
[SoftcamManager] Poll occured at Fri Aug 19 12:00:45 2011
[SoftcamManager] Timer Check Enabled
NEXT CHECK 1313773245
[OnlineVersionCheck] Next check at: Fri Aug 19 18:00:45 2011 (now=Fri Aug 19 12:00:45 2011)
RemovePopup, id = ZapError
[OnlineVersionCheck] No New online version found
[OnlineVersionCheck] No New online version found
[OnlineVersionCheck] No New online version found
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
poll: unhandled POLLERR/HUP/NVAL for fd 31(17)
playing 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.dbe31.tv" ORDER BY bouquet
no .meta file found, trying to find PMT pid
file not valid
alloc PVR
allocate demux
PVR source is not valid!
accel 8704 bytes
accel memstat: used=0 kB, free 3600 kB, s 0 kB
accel memory: 0
ConvertToHumanReadable: no or unknown type in tpdata dict!
!!!!!!!!!!!!!! PTS-Plugin: __evStart
resolved to PLAY
eDVBServicePlay::unpause
RemovePopup, id = ZapError
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'usbd0': {'dhcp': False}, 'usbf': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'ip': [192, 168, 1, 101], 'up': True, 'mac': '00:1d:ec:02:32:d3', 'dhcp': True, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'postdown': False}}
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
ConvertToHumanReadable: no or unknown type in tpdata dict!
[OnlineVersionCheck] parsing online version file.
job Components.Task.Job name=OnlineVersionCheck #tasks=3 completed with [] in None
[ePopen] command: /usr/softcams/CCcam.2.2.1
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
ConvertToHumanReadable: no or unknown type in tpdata dict!
ConvertToHumanReadable: no or unknown type in tpdata dict!
ConvertToHumanReadable: no or unknown type in tpdata dict!
ConvertToHumanReadable: no or unknown type in tpdata dict!
[CrossEPG_Auto] poll
It's now Fri Aug 19 12:02:24 2011
[timer.py] next activation: Fri Aug 19 12:04:04 2011 (in 99997 ms)
It's now Fri Aug 19 12:02:24 2011
[timer.py] next activation: Fri Aug 19 12:04:04 2011 (in 99995 ms)
It's now Fri Aug 19 12:04:04 2011
[timer.py] next activation: Fri Aug 19 12:05:44 2011 (in 99997 ms)
It's now Fri Aug 19 12:04:04 2011
[timer.py] next activation: Fri Aug 19 12:05:44 2011 (in 99994 ms)
It's now Fri Aug 19 12:05:44 2011
[timer.py] next activation: Fri Aug 19 12:07:24 2011 (in 99997 ms)
It's now Fri Aug 19 12:05:44 2011
[timer.py] next activation: Fri Aug 19 12:07:24 2011 (in 99994 ms)
[SoftcamManager] Poll occured at Fri Aug 19 12:06:45 2011
[SoftcamManager] Timer Check Enabled
[SoftcamManager] CCcam.2.2.1 already running
[SoftcamManager] Telnet info not allowed, can not check if frozen
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
It's now Fri Aug 19 12:07:24 2011
[timer.py] next activation: Fri Aug 19 12:09:04 2011 (in 99997 ms)
It's now Fri Aug 19 12:07:24 2011
[timer.py] next activation: Fri Aug 19 12:09:04 2011 (in 99995 ms)
It's now Fri Aug 19 12:09:04 2011
[timer.py] next activation: Fri Aug 19 12:10:44 2011 (in 99997 ms)
It's now Fri Aug 19 12:09:04 2011
[timer.py] next activation: Fri Aug 19 12:10:44 2011 (in 99994 ms)
It's now Fri Aug 19 12:10:44 2011
[timer.py] next activation: Fri Aug 19 12:12:24 2011 (in 99997 ms)
It's now Fri Aug 19 12:10:44 2011
[timer.py] next activation: Fri Aug 19 12:12:24 2011 (in 99994 ms)
action -> InfobarEPGActions InfoPressed
BOUQUET: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x1a22940> >
BOUQUET: 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet
action -> OkCancelActions cancel
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 768, in closing
AttributeError: 'NoneType' object has no attribute 'ref'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x1a1ee68>>,('OkCancelActions', 'cancel')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>
Ooops sorry double post:rolleyes: I've installed the latest Vhannibal Hotbird settings, still nothing. I am not getting any FTA channels. thanks for your continued help and patience Sicilian
Andy also tried your suggestion started Cross EPG via blue button, get a letterbox stating "Starting Downloader" then an error message of tuner not available.
You say you've got a motorised dish. Do you mean twin output? Is the motorised dish actually pointing to 13deg hotbird when you disconnect the LNB?
What are you tuner settings when you go to Menu > Setup > Service Searching > Tuner configuration?
It's pointing at 13.0E when I disconnect the duo and move the lnb to the solo. Just had a discussion with a very helpful supplier on the phone and come to the conclusion that I need a reliable installer to come and check the set up though (it's a long story).
Re flashed the box, got later version of Dbedit and ftp'd the bouquets. Tuner is set to Simple, Single for the solo set up. Using the up/down buttons I can get access to some FTA channels (multiple bouquets deleted now).
satmanbasil
20-08-11, 13:10
Hi mate
Ok lets retrace your steps press menu ...select SETUP...select SERVICE SEARCH......select TUNER CONFIG your see a green bar with currant config stated press return again to enter the Config mode
OK now you should be looking at the following
Mode = simple On mine because i have a motor system i have config to see 4 birds so looks like this
Diseqc A/B/C/D
Port A ....... Hotbird 13e
Port B ......... Astra 19e
Port C ........ Thor 0.8w
Port D ......... Eurobird 28e
Set volt @ 22khz yes
Send diseqc on sat change no
From what i have read you should have maybe port A and B in your list with one assigned to Hotbird
As mentioned go to FTA channels which should all clear. As you know you cannot see other channels unless you have a card for the provider or you have access to a share network which involves using CCcam which we cannot go into much detail on this board.
regards
satmanbasil
Thanks to everyone for all the help I have got it sorted and working now. One of the main issues was that I was trying to set it up for Hotbird 13.0E and have found that the cowboy who installed my dish has not aligned it properly. Went back to Astra settings and manaaged to set it up. Only thing I need to do now is find a reputable installer who can come and make sure the system is set up properly for future use. For example on BBC1 NW I'm only getting 27% SNR. Don't know if it's allowed but if it is I will post in the wanted section for a decent installer to come and sort this out?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.