Seem to be getting this error every day when trying to access Openwebif at the moment. Reboot resolves it for a day, but comes back again. Any ideas?
openwebif.jpg
Seem to be getting this error every day when trying to access Openwebif at the moment. Reboot resolves it for a day, but comes back again. Any ideas?
openwebif.jpg
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
@sicilian
5.1.011
Are you using the new interface?
The error message seems to be related to failing to get information for a network interface (the first interface).
How is your network set up?
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Not using the new material web interface, although I did test to see if it helped. It didn't.
Network is hardwired, Cat6, static IP address. All other network functions are fine.
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
If I restart the Network from the menus, OpenWebif connectivity is restored. But the following day it will fail with the same error.
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2
Still have this issue. Updated to latest build. Tried removing Webif plugins and reinstalling. Any help?
Mut@nt HD2400 - 1TB HDD, 2x DVB-S/S2 + 1x DVB-C/T/T2