Not without a lot of work. There is currently s project for odroid.
Not without a lot of work. There is currently s project for odroid.
I followed Abu's suggestion and bought the TM Nano M3 with a Netis 300Mbps wireless N adapter (the one WoS sell). I have the Nano working in client mode on an ethernet cable, but the instructions re the Netis are pretty light. Am I right in thinking I need to download a driver, and does anybody know if any of the drivers in the OpenVix plugins will work? Sorry if I should have posted this in another section.
The only problem I'm having with client mode on the cable so far is as follows. I'm using a VU+ Solo 2 as the host server. On this receiver I have one tuner on 28.2 and one on a movable dish, that due to a fault is stuck on 19.2. My problem is that if the Solo is on a 28.2 channel that is the only channel from that satellite that I can view on the client, whereas I can change and view channels on the 19.2 satellite. Is that normal? I was expecting that the channel in use would limit the ability to change just to channels on that transponder. All the bouquets from the VU+ have come across to the Nano. Once again thanks in advance for any advice.
Last edited by Citizen33; 16-09-17 at 11:17.
According to the WOS site, the Netis drivers are pre-installed in ViX.
You need to reboot the box after the adapter has been plugged in.
Citizen33 (16-09-17)
Thanks. Once I knew the driver was there I entered the SSID and PW and the Nano has connected via wi-fi. There is the very slight occasional lag though, even with the client sitting beside the Virgin Media Superhub 2. Having said that, it seems better after a few minutes.
What is hte difference between this and fall back receiver?
Thanks,
FP.
I have just tried it and I get a mseeage no data in PAT?? (just ran down the stairs and forgot the whole messgae!!!)
Ideas?
Main box 1 is connected to a motorosied dish and fixed dish, Slave Box 2 uses this client method to work of Main Box 1's tuner, can Slave Box 2 select a channel to use the motoroised dish connected to Main box 1?
Hope hat makes sense.
Yes .
Can this be used to pull in selected bouquets or would I be best using remote streams converter to send individual bouquets?
No, it makes an identical copy of the bouquets.
dsayers (18-09-17)
Hi has anyone had problems with openvix latest image? the circle of death spins periodically, and remote is laggy, all set up is as previous on 4.2.
its an edision os mini
Do you have xstream tv installed?
Sent from my HUAWEI VNS-L31 using Tapatalk
Bangord30 (21-09-17)
Tried a few ways but I must be missing something. I can get the client receiver to change satellites and channels but unable to figure out how to get the client receiver to record on the server receiver.
you have to setup mounts, use the mount as a HDD