Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: No satellite on Tuner B!

  1. #1
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts

    No satellite on Tuner B!

    Hi all i have this strange problem where I can only get tuner A to work, everytime I go to tuner b I get an error message. I have had the box for a while now and it's been fine it was only because I was recording something I realised I had this problem.
    I am on 070 I have tried doing a backup and install the image again, also going back to older backups but still not working. I tried a fresh install and that seems to sort the problem out so at least I know it's not a tuner failure! I would like to keep all my timers and settings so if anyone knows what could be the problem and how to fix it please let us know.
    Thanks

    Sent from my SM-G900F using Tapatalk
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  2. #2
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Compare tuner settings between new and old images

  3. #3
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    Hi abu nothing has changed that is the strange part!

    Sent from my SM-G900F using Tapatalk
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  4. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    If a new image without restores is fine, then issue is with settings on older image. You can restore your timer file if you want.

  5. #5
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    Here are some screenshots of the problem.
    Is there a driver that can be uninstalled and installed again?

    Tuners.jpgTuner A.jpgTuner B.jpgTuner B message.jpg
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Upload your settings file form both images. It is located in /etc/enigma2/

  7. #7
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    Ok just tried doing another restore and usually it comes up with an error message when doing so but this time there wasn't and its working fine now??? Thanks for your help anyway.
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  8. #8
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    I was hoping you would have uploaded the files so that we could learn from it and help others if they are in teh same situation.

    Glad you are sorted.

  9. #9
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    I will create the problem again and upload th settings for you

    Here is the error message that happens when trying to restore previous settings.
    error when backing up.jpg
    Last edited by skratch; 31-10-14 at 11:04.
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  10. #10
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    The problem has started again!
    Here is my settings file you requested.
    settings.zip
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  11. #11
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    I suspect this is the issue. I've seen it a few times where people select automatic for their tuner (which is automatic diseqc). This occasionally causes issues.

    Code:
    config.Nims.1.diseqcA=282
    config.Nims.1.diseqcB=3601
    config.Nims.1.diseqcC=3601
    config.Nims.1.diseqcD=3601
    config.Nims.0.diseqcA=282
    config.Nims.0.diseqcB=3601
    config.Nims.0.diseqcC=3601
    config.Nims.0.diseqcD=3601
    If you don't want to start afresh, you can try the following. Put enigma to sleep with init 4 telnet command. Edit the above lines so that you end up with
    Code:
    config.Nims.1.diseqcA=282
    config.Nims.0.diseqcA=282

  12. The Following User Says Thank You to abu baniaz For This Useful Post:

    skratch (01-11-14)

  13. #12
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    Nice one Abu if it happens again I'll try this out 👍

    Sent from my SM-G900F using Tapatalk
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  14. #13
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    I tried what you said as i am having this problem again.
    But this is what i am getting on telnet

    Code:
     root@vuduo:~# init 4 telnet
    Usage: init {-e VAR[=VAL] | [-t SECONDS] {0|1|2|3|4|5|6|S|s|Q|q|A|a|B|b|C|c|U|u}}
    root@vuduo:~# config.Nims.1.diseqcA=282
    -sh: config.Nims.1.diseqcA=282: not found
    root@vuduo:~# config.Nims.0.diseqcA=282
    -sh: config.Nims.0.diseqcA=282: not found
    root@vuduo:~# 
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

  15. #14
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Just "init 4"

  16. #15
    skratch's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    364
    Thanks
    153
    Thanked 30 Times in 24 Posts
    Same thing.

    Code:
    root@vuduo:~# init 4
    root@vuduo:~# config.Nims.1.diseqcA=282
    -sh: config.Nims.1.diseqcA=282: not found
    root@vuduo:~# config.Nims.0.diseqcA=282
    -sh: config.Nims.0.diseqcA=282: not found
    root@vuduo:~# 
    I have a VU+ Duo2 always updated to the latest Vix build using the default skin.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.