Not Going To Correct Sat Positions.

[Emulated]

New problem to me. I set my SF4008 tuner to advanced. I do a scan without USALS, store the numbered positions. Never returns to the saved positions. I do a scan with USALS and the same thing happens. The Lat/Long settings are correct. No backlash on the Technomate motor. Can it be the LNB? Maybe the image HDfreaks as it works with CI+.

[Huevos]

If it works in one image and not another it is not a motor or lnb fault. Are you sure you have the tuner configured correctly?

[Emulated]

If it works in one image and not another it is not a motor or lnb fault. Are you sure you have the tuner configured correctly?

I double checked all the settings. Went on the roof ad double checked but whilst I was there I decided to change the LNB as I had a spare Invacom TWF-031 C120 Twin in my goodies box. Did a factory reset and it is working ok. So maybe it was the lnb which was 5 years old or a dodgy connection.