Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 12 of 12

Thread: Bouquet Set up for SOLO2 - LINUX - VIX - Enigma2

  1. #1

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post

    Bouquet Set up for SOLO2 - LINUX - VIX - Enigma2

    I have just set up a VU solo2 with Linux, Vix, enigma2. I am totally new to this and set up so far using the dummies guides.

    Could someone provide detail on How to load a Bouqet (something that gives me SKY list). ie form scratch.


    Appreciate any and all help. Thanks in advance.

  2. #2
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Menu > Setup > Service Searching > ABM (AutoBouquetsMaker)


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  3. #3
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Use "expert mode" in Configure and also schedule ABM to run every day @ 04:00am and set include 'not indexed' channels to Yes then green button to save. In providers set Sky UK to Yes and use "CustomRegion" NOT SD OR HD, use CUSTOM. Then in this order FTA Only = No, Main Bouquet = No, Section Bouquet = Yes, HD Bouquet = No, FTA Bouquet = No, FTA HD Bouquet = No & Swap Channels = Yes and green button to save. Then in Hide Sections tick the ones you don't want to appear and then green button to save and then Start Scan.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  4. #4

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Do I not have to load something like catseye. I was expecting that as an answer. Then the steps for loading it using a FTP and the location to load it to.

  5. #5
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Nope not just for 28.2. Just use ABM and follow my instructions.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  6. #6

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Thanks I will try that when I get home.

    Currently - there is a list of channels there. But every time you want to change a channel, you cannot tell what programme is on. Then when you click eg SKY1 the channel name appears. There never seems to be a list of channel names until you click in each one and move down the list.

  7. #7
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Are you confusing yourself with EPG (another words 7 day TV guide?)


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  8. #8

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Hi Andy

    I may be.
    I have made all the settings as per your note above. This has created the order etc.
    But, the channels are there but no names appear until you click on the channel. eg

    SKY sports, Sky sports 1 shows up. But name of what is playing. eg Live PGA Tour Golf at the moment.

    The names disappear and appear depending on if you have clicked the channel ie pressed ok. on remote.

  9. #9

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    When I press EPG. It just got a time schedule and no programme names.

  10. #10

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jul 2014
    Location
    God Knows
    Posts
    1,694
    Thanks
    582
    Thanked 266 Times in 247 Posts
    Quote Originally Posted by msumal View Post
    When I press EPG. It just got a time schedule and no programme names.

    go to menu, setup, system - epg, (make sure you have HDD or usb for it to load onto. setting epg location use internal flash or the hdd, press green, go to cross epg, configure, enable cdv no, scheduled download - once a day, set at 03:00am, this will download daily to keep epg updated - press ok, go to opentv provider and tick skypress green button to save. go back and download now. all done

  11. The Following User Says Thank You to john doe For This Useful Post:

    Spuds (03-09-16)

  12. #11

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by john doe View Post
    go to menu, setup, system - epg, (make sure you have HDD or usb for it to load onto. setting epg location use internal flash or the hdd, press green, go to cross epg, configure, enable cdv no, scheduled download - once a day, set at 03:00am, this will download daily to keep epg updated - press ok, go to opentv provider and tick skypress green button to save. go back and download now. all done


    Many Thanks John

    followed the steps you supplied. It Worked perfectly.

  13. The Following User Says Thank You to msumal For This Useful Post:

    john doe (26-08-16)

  14. #12

    Title
    Junior Member
    Join Date
    Feb 2014
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Thanks Andy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.