Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 2 FirstFirst 12
Results 16 to 23 of 23

Thread: Some guidance

  1. #16
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    So should have said this a while ago ..... setup logs (in menu/setup/) to record to usb or hdd (not flash).
    Enable debug logs.
    Assuming there is no crash log?, then when it „freezes“. Use putty to log in (ip address, root) enter init 4, wait 20 secs and then init 6 to restart.
    Post the log here (debug or crash) ... you can ftp the log to your PC from the usb or hdd.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  2. #17

    Title
    Senior Member
    Join Date
    Dec 2017
    Posts
    114
    Thanks
    13
    Thanked 10 Times in 10 Posts
    Thanks TWOL.

    I've had some success on 5.0.032. Woke this mornign and box turned on with no problems. Same set up as 5.1.002. If the wife has no problems today, I would say that issue is localised to that version for me at least.

    Will give the above a shot on the other box with 5.1 that shows the problem over the weekend (I don't have to return it for 30 days).

    comfortable with putty and ftp...but init 4 and init 6? these are init.d boot up scripts right?

    what is the command to run them?

  3. #18
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by lnoton View Post
    Thanks TWOL.

    I've had some success on 5.0.032. Woke this mornign and box turned on with no problems. Same set up as 5.1.002. If the wife has no problems today, I would say that issue is localised to that version for me at least.

    Will give the above a shot on the other box with 5.1 that shows the problem over the weekend (I don't have to return it for 30 days).

    comfortable with putty and ftp...but init 4 and init 6? these are init.d boot up scripts right?

    what is the command to run them?
    login to root with putty.
    then just type in init 4 (enter) and then init 6 (enter)
    init 4 stops all activities on the box (hence wait a few seconds for that to happen) and init 6 reboots the box
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  4. #19
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    Quote Originally Posted by lnoton View Post
    I've set to 1080p and set refresh to 50 rather than multi. For no reason but a guess.

    Also rolled back to 5.0.032.
    You've changed a few things, any one of which may have improved things.

  5. #20

    Title
    Senior Member
    Join Date
    Dec 2017
    Posts
    114
    Thanks
    13
    Thanked 10 Times in 10 Posts
    Ha. I thought that last night. So I actually put it back to 2160p and multi.

  6. #21

    Title
    Senior Member
    Join Date
    Dec 2017
    Posts
    114
    Thanks
    13
    Thanked 10 Times in 10 Posts
    No complaints from the wife. So we might have zerod in on a setup triggering this problem.

    I might use the other box in parallel with a cable into each to troubleshoot whilst maintaining peace in the house!

  7. #22
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    I'm surprised to see on another thread that you have already returned both boxes.

  8. #23

    Title
    Senior Member
    Join Date
    Dec 2017
    Posts
    114
    Thanks
    13
    Thanked 10 Times in 10 Posts
    Yup. Late last night the box failed in the same way. Turned on and remote and front button remained unresponsive.

    :-(

    Not sent, but will be returned tomorrow to the rain forest. Plenty on there as returned at cheap prices.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.