AB-Com PULSe 4K SE. Crazy offer only £99! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
AB-Com PULSe 4k Rev II Twin tuner only £149! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[Venton Unibox HDx] Menu button not working?!!

  • Thread starter Thread starter Adeingolf
  • Start date Start date
Found this link for the venton uni box suport it has downloads for difrent images and drivers boot logos tools plugings and so on hear is the link for any venton users wanting to have a look
http://www.egami.to/index.php/id-down/fki
 
Last edited by a moderator:
I have similar issues on tm twin oe on helios 016..if you install a plugin and have to restart gui. You get strange flickering graphics on boot and no menu. If I do a full restart everything is back to normal.
 
Hi aksu did you change your drivers before you flashed to Helios or after?
I was going to flash to Helios before this thing with the venton drivers started.
 
History is following. When menu problen first exist i reflashed back to Zeus 5. Then all buttos worked ( previus driver pack was restored). Then i reflashed Zeus 16. Problem came back. Driver pack was updated newer version between those. Then i flashed Helios 15 ( because nothing else helped and could control box by phone) and copied dvb.ko with date stamp 16.1.2014. With that driver pack all were fixed. After that i updated to Helios 16. All worked still because there in no newer driver set on that update.
 
OK thanks aksu the date of my drivers I had are 6/2/2014 so I it should be OK to flash Helios hopefully I won't be needing to flash the box for a verry long time bloody pain ha
 
New fixed updated drivers will be in ViX image Helios build 18 onwards.

Code: 
https://github.com/oe-alliance/oe-alliance-core/commit/19c6df760b7e3c7fe6ca566efc193b38955f5b62
 
great news Sicilian, i be able to finally flash to helios cheers :thumbsup:
 
2) Replace the drivers in lib/module/3.6.0/extras

Here's the lastest drivers as next ViX build could be another few days.

To replace the drivers do as follows: -
1) Extract the attached zip file.
2) FTP the dvb.ko file to lib/module/3.6.0/extras overwriting the existing.
3) Reboot the receiver, hold down standby button on the remote and select restart on TV.
4) Once rebooted the unit will work as required.
 

Attachments

abu baniaz said:
The fixed drivers will be in newer Vix images. You have seen the poll about new image name?

We don't normally have two concurrent threads with the same issue. Thread is now closed. Please continue in the other thread, link below.
Click to expand...

I think move the post would have been enough(bug remote control vix-others teams).both user and staff exposed and I see nothing wrong with that.

@abu baniaz, Thanks for pointing out the post that talks about the problem and especially for telling me that the driver was not set in the helios 17.

I recognize my lack of reading, but the two sections at a receiver caused me cluelessness, he saw nothing in unibox section ...
about my problem.

lack of reading time, I went to download the driver and did not read it right up and not down that thought this post .... that was fixed in build helios 18.

thanks sicilian phoenix.

@andyblac a matter for the driver has not been modified manufacturer, at least dvb.ko since early February 2014. (work perfect en ventonsupport 3.0)

has been the compilation OE 4.0 enigma2 causing the adjustment of the driver?
 
Last edited:
fogonero said:
@andyblac a matter for the driver has not been modified manufacturer, at least dvb.ko since early February 2014. (work perfect en ventonsupport 3.0)

has been the compilation OE 4.0 enigma2 causing the adjustment of the driver?
Click to expand...

No, it doesn't.
 
HI same issue here with Venton HD2 remote control not responding on menu and other key presses spent the last hour flashing zeus flashing helios with same problem thinking it was a bug. No good on either but then I noticed when I unplugged the LAN connection at the back and then flashed with Zeus everything worked again briefly selected a channel and then after a few minutes plugged back in LAN cable and remote has become unresponsive again
 
Last edited:
degoosefish said:
HI same issue here with Venton HD2 remote control not responding on menu and other key presses spent the last hour flashing zeus flashing helios with same problem thinking it was a bug. No good on either but then I noticed when I unplugged the LAN connection at the back and then flashed with Zeus everything worked again briefly selected a channel and then after a few minutes plugged back in LAN cable and remote has become unresponsive again
Click to expand...

Did you read post 49, only 3 posts above yours?
 
You must log in or register to reply here.

Similar threads

F
[VU+ Duo] Stuck on the Openvix boot up screen with menu bar
Replies
5
Views
3K
abu baniaz
abu baniaz
M
TM-TWIN-OE front panel (only) failed
Replies
11
Views
10K
pz8l8t
P
K
TM-Nano-2T stuck in Booting
Replies
4
Views
7K
kayvee123
K
Larry-G
  • Locked
OpenViX Zeus Updates and Changelogs.
Replies
14
Views
31K
Larry-G
Larry-G
G
Review of Android App Vu+ Player
Replies
13
Views
19K
gunner786
G

OpenViX Feeds Status

Back
Top