How to USB flash/upgrade Technomate TM-2T

Guide how to USB flash / upgrade a Technomate TM-2T.

1) Download your preferred image.
2) Format a USB stick FAT32 on your PC, leave the stick connected to your PC.
3) Power off your receiver.
4) Extract the rar or zip file and copy the complete update folder to the root of your USB stick.
5) Now check the file stucture on your USB stick. You should have update > tm2toe > cfe > image flash files inside this folder.
6) Remove USB stick from PC and connect to receiver.
7) Power on the receiver, when you receiver the message on your TV screen press OK on the front panel.
8) Wait for the flashing process to complete, do not power off until the complete message is on your TV screen.
9) Once complete remove the USB stick, start repeatedly pressing EXIT button on front panel and keep repeatedly pressing EXIT for 10 seconds after power on.

how long is it supposed to take pls?

hullfc27 said:

how long is it supposed to take pls?

Click to expand...

2 or 3 minutes.

New .pdf tutorial added to the first post.

What's with repeatedly pressing exit button 10 times. As far as I can see makes no difference. Once image has loaded, message says remove usb and ac power off and on. Once you do that it goes into wizard mode if you want that. Have loaded vix 773 image. Have tried Openpli, ATV but vix is best. Liked the media center in ATV.

It's repeatedly press for 10 seconds not 10 times, these were the instructions given to us from Technomate. This is only necessary after flashing a bootloader for the first, after that it is no longer required.