New Vu+ Hardware Drivers

Larry-G · Jun 2, 2011

20110526
- Support HDMI CEC device
- Support DDP

20110531
- Change CEC address scheme
(read : initiator, write: destination)

to use these drivers open the relevant archive using winrar

for the Duo

Code:

http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110531.tar.gz

for the Solo

Code:

 http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110531.tar.gz

for the Uno

Code:

 http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110531.tar.gz

for the Ultimo

Code:

http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-2.6.18-7.3-4.4.3-20110531.tar.gz

now navigate to

lib/modules/2.6.18-**/extra

on your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

or just wait for these to be incorporated into the VIX image.

Larry-G · Jun 2, 2011

i have loaded the Uno drivers to my box and all is working fine.

silverfox0786 · Jun 2, 2011

im guessing andy will impliment this in a update so i will wait as i have 4 different boxes for it to be loaded on to

Alec · Jun 2, 2011

I put these on vix 2.1 restarted box. It works, but still don't what they do.

silverfox0786 · Jun 2, 2011

Alec said:
I put these on vix 2.1 restarted box. It works, but still don't what they do.

can i just advise ppl if they dont know what they are doing or why they are doing it then dont do it

pooface · Jun 2, 2011

Read my post in another thread regarding this. It adds hdmi cec na ddp. Definitions of what these are, and allowing you to decide whether you'd want them, are in there...

Larry-G · Jul 13, 2011

Vu+ New Drivers (08-07-2011)

20110708
- Support DTS audio codec
- Fix CI recognition problem when restart
- Fix restart crash/delay problem

to use these drivers open the relevant archive using winrar

for the DUO vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110708.tar.gz
for the SOLO vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110708.tar.gz
for the UNO vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110708.tar.gz

now navigate to

lib/modules/2.6.18-**/extra

on your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

Vu+Solo

Code:

 http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110708.tar.gz

Vu+Duo

Code:

 http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110708.tar.gz

Vu+Uno

Code:

 http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110708.tar.gz

please note these drivers are incremental and contain all previous releases within, so you only need to flash the latest versions to take advantage of all previous releases.
also be aware that if you dont know what your doing leave well alone and wait for them to be incorporated into your chosen image.

Larry-G · Jul 15, 2011

Vu+ New Drivers 15-07-2011 (Uno)

20110715(uno)
- Lower the default FAN rpm
- Increase dynamic range of FAN speed

to use these drivers open the relevant archive using winrar

for the UNO vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715.tar.gz
now navigate to

lib/modules/2.6.18-**/extra

on your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

Vu+Uno

Code:

 http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715.tar.gz

please note these drivers are incremental and contain all previous releases within, so you only need to flash the latest versions to take advantage of all previous releases.
also be aware that if you dont know what your doing leave well alone and wait for them to be incorporated into your chosen image.

Larry-G · Nov 14, 2011

20111114
- Fix HDMI CEC problem(wakeup from standby)
- Reduce zapping noise in some A/V Receiver
- Fix Recording/Playback problem
- Fix High bitrate tuning problem(Uno, MUST Need a FPGA update,
- Improve media playback
- Fix skip problem in media playback
- Change temperature calculation algorithm.(uno, ultimo)
- Change the lowest FAN speed(ultimo)
- Fix incorrect keycode in the remote control(ultimo)
- Add interface to control VFD in the application(ultimo)

=====================

To use these drivers open the relevant archive using winrar

now navigate to

lib/modules/2.6.18-**/extra

on your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

once the files have been transferred exit out of the FTP program and start a telnet session ( DO NOT REBOOT THE RECEIVER YET. )

once you have logged in issue the following command

depmod -a

after issuing the mentioned command you can now reboot the receiver.

To use the FPGA update file ( UNO ONLY ) unrar the file and copy the ( TS_PRO.dat ) file to a memory stick or to TMP on your receiver, now go to plugins and you will see a FPGA update option there, press this and navigate to the file you placed on your usb stick / receiver. This update takes around 5 minutes to complete.

Larry-G · Aug 20, 2012

20120820
- Improve TS playback
- Improve Graphic 2D acceleration
- Fix Russian VFD display(duo, uno)
- Fix High/low symbolrate channel scan problem.(Uno, Ultimo : Need FPGA Update)
-- UNO : http://archive.vuplus.com/download/fpga/vuuno/4.5/
-- ULTIMO : http://archive.vuplus.com/download/fpga/vuultimo/4.5/
- Fix EOS detection problem in media playback
- Enhance Security

Download via

Code:

http://archive.vuplus.com/download/drivers/

Rob van der Does · Aug 21, 2012

VU+ has corrected the files on it's server: the download-function in the plugin 'FPGA upgrade', as is installed by default, can now be used (applies to UNO & Ultimo).

So very easy to do now:
FPGA Upgrade --> Blue (for download) --> Green (for upgrade)

Larry-G · Aug 24, 2012

new drivers again today.

20120824
- Change duo's remote control to the advanced type(for HBBTV)

Larry-G · Aug 24, 2012

ultimo drivers now also online, added to above post with the others.

mmattys30 · Dec 24, 2012

Navi x

Any one comeing up with a navi-x type Xbmc plug in like the jail brake on the Apple TV 2

Larry-G · May 6, 2013

06.05.2013

New Vu+ Drivers.

20130506
- Support dual tuner blindscan(duo2, uno, ultimo)
- Switching to kernel 3.3.8(solo2, Needs a kernel update)
- Fix SD video output problem when transcoding enabled(solo2)
- Enhance demux filtering(solo2)
- Official duo2 driver release
- Support DTS-HD
- Add redundant interface to zapping mode

DO NOT update the solo2 drivers manually as it needs a kernel update, wait for them to be included in the image, the Solo, Duo, Uno and Ultimo can be updated manually if you want to.

vmax · Jun 21, 2013

Drivers VU+ 21/06/2013

20130621

- Fix TS Playback problem
- Fix i2c error handling
- Turn off LCD at standby by default(duo2)
- Change default LCD brightness(duo2)
- Support DVB-T external antennae(duo2)

shizik · Jun 21, 2013

we get all this drivers with online ViX build update ?

pooface · Jun 21, 2013

shizik said:
we get all this drivers with online ViX build update ?

When images with these drivers (which is when the online update feeds with these drivers will be built), are built, then yes, you will get these drivers. Otherwise, you can manually update them (if you really want to try them before the new updates)...

Rob van der Does · Jun 21, 2013

shizik said:
we get all this drivers with online ViX build update ?

Of course ....

vmax · Jul 3, 2013

Duo2 driver update

20130703(duo2)

- Support transcoding bit/frame rate change(100K< bitrate< 5M, framerate=23976 24000 29970 30000 59940 60000 )

- Enable SD video when transcoding

New Vu+ Hardware Drivers

V.I.P ,

V.I.P ,

silverfox0786

Guest

Member

silverfox0786

Guest

V.I.P

V.I.P ,

V.I.P ,

V.I.P ,

V.I.P ,

ViX Beta Tester

V.I.P ,

V.I.P ,

mmattys30

Guest

V.I.P ,

New member

Attachments

shizik

Guest

V.I.P

ViX Beta Tester

New member

Attachments

Similar threads

OpenViX Feeds Status