I have a normal LNB with two coaxes running into the two inputs on the HD51. Should the tuners be set to 'Loop Through' or Sat A Sat B? What is the difference between the two connections?
Thanks
I have a normal LNB with two coaxes running into the two inputs on the HD51. Should the tuners be set to 'Loop Through' or Sat A Sat B? What is the difference between the two connections?
Thanks
You need a feed going into Tuner A and a feed going into Tuner B to fully utilise your receiver.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
mick4545 (19-03-18)
Thanks for the quick reply. I was on Loop Through. Now Tuner A and B tuned as:
AVL6211 (DVB-S2) 1KR/L/M/N
Simple
19.2E Astra
With that setup I should Be able to record 2 channels and watch a recorded program at the same time, is that correct?
If I want to record more than 2 programs at the same time I will need a Unicable, is that correct
?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Follow us on Twitter 0penViX
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
mick4545 (19-03-18)