el bandido (20-03-18)
This is what was posted over on Pli
You can work around this issue.Code:init 4Change a line which looks like this:Code:config.Nims.0.advanced.lnb.1.powerMeasurement=trueto:Code:config.Nims.0.advanced.lnb.1.powerMeasurement=falsethen:To my disappointment when I checked my config it was already set to 'false'Code:init 3
So i did the opposite and changed it to 'true'
and tested by sending the dish to another sat and immediately a 'tune failed' msg appeared but the dish continued to move to the selected channel and satellite and locked on the signal as soon as it landed on the channel, I knew I could hide the error message by going into 'user interface' settings and enabling 'Hide Zap Errors'
I then continued to test by sending the dish from one end of the arc to other for at least 30mins and each and every time the signal locked immediately.
This is a dirty fix and the only down side is that you loose the dish moving animation but I can live with that until or if a real fix appears.
I stress though that I am using a vbox so no idea if this method works with a diseqc motor, also for me this survives a reboot.
Fix for HD51 will be in next release build.
The fixes are here:
https://github.com/OpenViX/enigma2/c...96ca95eadf3ac9
https://github.com/OpenViX/enigma2/c...21e88e4db9320c
Last edited by abu baniaz; 03-04-18 at 20:36. Reason: Add link to other commit
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Follow us on Twitter 0penViX
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
aadham (23-03-18),bassethound (24-03-18),el bandido (23-03-18),maxben (23-03-18),RustySpoons (27-03-18)
Release feeds for OpenViX 5.1.022 being uploaded now. This contains the motor fix for HD51.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Follow us on Twitter 0penViX
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
RustySpoons (27-03-18)
Confirming that the motor is now working as it should.
Had a look at the fix on github and it seems so minor (yet obviously critical) that it seems incredible the problem has gone on for so long.
Is this a real fix or an enigma work around ?
The "fix" to compensate for drivers issues, has resulted in a constant spinner if you get tune failed. only way around it is to panic zap, reflash, init 4 edit last channel
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Follow us on Twitter 0penViX
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
im stuffed with that commit. constant spinner when there was no lock.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Follow us on Twitter 0penViX
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Follow us on Twitter 0penViX
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
The commit has been made to affect tuning lock of all receivers.
@Sicilian and @Huevos cannot reproduce the issue I experienced.
maxben (24-03-18)