Any idea what is wrong my box is stuck on the VIX logo its an xtrend 8500
Any idea what is wrong my box is stuck on the VIX logo its an xtrend 8500
I can connect with Putty and have tried a few of the init commands, shutdown , reboot but still stops on vix logo
The first problem is this:
and that's a real problem as it should be there, so if it isn't you have a fundamental problem.< 403.010> File "/usr/lib/enigma2/python/Plugins/Extensions/AutoTimer/AutoTimer.py", line 42, in <module>
< 403.011> ImportError: No module named Toolkit.SimpleThread
Look in /usr/lib/enigma2/python/Plugins/SystemPlugins/, it should contain (amongst other things) SimpleThread.pyo.
Then it appears that something is trying to execute the log output itself, hence all of the later sh error reports.
Not sure how you generated the log, but it has DOS line ending, and all of the long-ish lines contain an extra 97 spaces in the middle of the line.
PS: in case anyone wonders, this is ViX 5.1.002.
Last edited by birdman; 10-02-18 at 21:32.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Filezilla will not connect I get the message below
Connection attempt failed with "ECONNREFUSED - Connection refused by server".
Thanks Birdman, I got this from your command,
login as: root
root@et8500:~# login as: root
root@et8500:~# cd /usr/lib/enigma2/python/Plugins/SystemPlugins/
root@et8500:/usr/lib/enigma2/python/Plugins/SystemPlugins# ls
AutoBouquetsMaker FanControl Satfinder __init__.pyo
CrossEPG PositionerSetup ViX
root@et8500:/usr/lib/enigma2/python/Plugins/SystemPlugins#
root@et8500:/usr/lib/enigma2/python/Plugins/SystemPlugins#
root@et8500:/usr/lib/enigma2/python/Plugins/SystemPlugins#
Password:
Well, you seem to have various things missing from there.
This is what my et8000 has:
all of which are (I believe) standard.Code:root@et8000:/usr/lib/enigma2/python/Plugins/SystemPlugins# ls AutoBouquetsMaker Hotplug Satfinder CommonInterfaceAssignment MPHelp Toolkit CrossEPG NetworkBrowser ViX FanControl NetworkWizard WirelessLan HdmiCEC PositionerSetup __init__.pyo
All I can suggest is downloading an image and doing a fresh USB flash (with a restore of a backup - assuming you take them).
Also, your putty sessions are a little odd. It's almost as if you are echoing back what you receive, based on your original posting, and that fact that you have a phantom "login as: root" line, followed by a "Password:" prompt here.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Try a few other usb sticks - preferably, old and small memory size - format FAT32 ... try removing everything bar the usb in the rear usb port and flash again.
see this tutorial for the ET8000:
http://www.openvix.co.uk/openvix-bui...20by%20USB.pdf
Well, you could take out the harddrive and stick it in another receiver - but not helpful in solving current issue
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
There is something that I cannot find out why or what is happening, my box is uploading a huge amount of data , I can see its up but what its doing not too sure where to or why.
I looked at Setup/Network/Utilities and there is a list of stuff that I dont know what they do but I was able to stop and disable autorun on them
Sounds like you have a port open on your router thats allowing people/systems to access your environment.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Can i check and How do I stop it
You need to login to your router and check the port forwarding settings.