Tricky error

[gotthard]

I have a tricky error in my receiver (vu+duo2).
On tuner A I have 28.2, 19.2, 13, 4.8 and 0.8 and on tuner B 4.8 and 0.8 and at C I have terrestrial
I have a Spaun that breaks up the different Lnbs
I'm running OpenPli 6.0 rc latest update and everything works. (on all satellites)

But if I install OpenVix (or OpenAtv) only channels of 0.8 (both tuners) and terrestrial are found. (of course I run with the same settings all the time)

Anyone know what is wrong?

Regards

[twol]

Post your tuner config here

[gotthard]

Post your tuner config here

Is it this you want
It is from OpenPLi where it works, but not on OpenVix
config.Nims.0.advanced.lnb.1.commandOrder=cut
config.Nims.0.advanced.lnb.1.commitedDiseqcCommand =AA
config.Nims.0.advanced.lnb.1.diseqcMode=1_1
config.Nims.0.advanced.lnb.1.fastDiseqc=true
config.Nims.0.advanced.lnb.1.sequenceRepeat=true
config.Nims.0.advanced.lnb.1.uncommittedDiseqcComm and=1
config.Nims.0.advanced.lnb.2.commandOrder=cut
config.Nims.0.advanced.lnb.2.commitedDiseqcCommand =AB
config.Nims.0.advanced.lnb.2.diseqcMode=1_1
config.Nims.0.advanced.lnb.2.fastDiseqc=true
config.Nims.0.advanced.lnb.2.sequenceRepeat=true
config.Nims.0.advanced.lnb.2.uncommittedDiseqcComm and=1
config.Nims.0.advanced.lnb.3.commandOrder=cut
config.Nims.0.advanced.lnb.3.commitedDiseqcCommand =BA
config.Nims.0.advanced.lnb.3.diseqcMode=1_1
config.Nims.0.advanced.lnb.3.fastDiseqc=true
config.Nims.0.advanced.lnb.3.sequenceRepeat=true
config.Nims.0.advanced.lnb.3.uncommittedDiseqcComm and=1
config.Nims.0.advanced.lnb.4.commandOrder=cut
config.Nims.0.advanced.lnb.4.commitedDiseqcCommand =BB
config.Nims.0.advanced.lnb.4.diseqcMode=1_1
config.Nims.0.advanced.lnb.4.fastDiseqc=true
config.Nims.0.advanced.lnb.4.sequenceRepeat=true
config.Nims.0.advanced.lnb.4.uncommittedDiseqcComm and=1
config.Nims.0.advanced.lnb.5.commandOrder=cut
config.Nims.0.advanced.lnb.5.commitedDiseqcCommand =AA
config.Nims.0.advanced.lnb.5.diseqcMode=1_1
config.Nims.0.advanced.lnb.5.fastDiseqc=true
config.Nims.0.advanced.lnb.5.sequenceRepeat=true
config.Nims.0.advanced.lnb.5.uncommittedDiseqcComm and=4
config.Nims.0.advanced.sat.48.lnb=2
config.Nims.0.advanced.sat.130.lnb=3
config.Nims.0.advanced.sat.192.lnb=4
config.Nims.0.advanced.sat.194.lnb=4
config.Nims.0.advanced.sat.282.lnb=5
config.Nims.0.advanced.sat.3592.lnb=1
config.Nims.0.configMode=advanced
config.Nims.1.advanced.lnb.1.commandOrder=cut
config.Nims.1.advanced.lnb.1.commitedDiseqcCommand =AA
config.Nims.1.advanced.lnb.1.diseqcMode=1_1
config.Nims.1.advanced.lnb.1.fastDiseqc=true
config.Nims.1.advanced.lnb.1.sequenceRepeat=true
config.Nims.1.advanced.lnb.1.uncommittedDiseqcComm and=1
config.Nims.1.advanced.lnb.2.commandOrder=cut
config.Nims.1.advanced.lnb.2.commitedDiseqcCommand =AB
config.Nims.1.advanced.lnb.2.diseqcMode=1_1
config.Nims.1.advanced.lnb.2.fastDiseqc=true
config.Nims.1.advanced.lnb.2.sequenceRepeat=true
config.Nims.1.advanced.lnb.2.uncommittedDiseqcComm and=1
config.Nims.1.advanced.sat.48.lnb=2
config.Nims.1.advanced.sat.3592.lnb=1
config.Nims.1.advanced.sats=48
config.Nims.1.configMode=advanced
config.Nims.2.multiType=1
config.Nims.2.terrestrial=2

[twol]

I really meant screen grab the images of your tuner setup Main Menu/Setup/Tuner Config/Tuner Setup and the individual screens for Tuners A & B.
Also which SPaun device?
More info is better

[gotthard]

I really meant screen grab the images of your tuner setup Main Menu/Setup/Tuner Config/Tuner Setup and the individual screens for Tuners A & B.
Also which SPaun device?
More info is better

I'll do that tomorrow!

[gotthard]

I'll do that tomorrow!

Problem solved
Diseqc 1.0 also must have values! Not only diseqc 1.1