Hi Guys,
I have noticed that The Sports Bouquet the channels are not in order like Sky Sport 1,2,3,4,5 but also noticed channel 4HD is in the Sport Bouquet.
I have deleted and did a rescan but the same
Hi Guys,
I have noticed that The Sports Bouquet the channels are not in order like Sky Sport 1,2,3,4,5 but also noticed channel 4HD is in the Sport Bouquet.
I have deleted and did a rescan but the same
I did an automatic scan then ran abm and it changed them quite a few others have done the same and it worked
Mutant HD2400 , 2 x DVB-S/S2, 2x DVB-T/T2/C ,OpenVix version 5.1.0028 , Simple Ten Eighty skin , and Tosh picons , remote Harmony 650, Amazon firestick
Easier/quicker to follow this
http://www.world-of-satellite.com/sh...l=1#post454260
I cannot replicate your issue about channel 4 HD. I am guessing you are using some modified files. No logs/modified files, so can't help further.
Last edited by abu baniaz; 18-07-17 at 22:36.
Bazzer (18-07-17)
Mine was the same on the Mutant HD2400 just do what Abu posted above and all will be ok
Mutant HD2400 , 2 x DVB-S/S2, 2x DVB-T/T2/C ,OpenVix version 5.1.0028 , Simple Ten Eighty skin , and Tosh picons , remote Harmony 650, Amazon firestick
Those channels are old service names associated with the Sid in the lamedb. The channels themselves will be correct, just the wrong channel name being displayed.
Thank you all.
Will we have to do this Automatic Scan every time a cable channel changes name temporarily, like the golf (sky golf, sky open) and movie channels (tom cruise, tm hanks, star trek).
Also, can I use this lamedb file to change channel names to whatever I want?
Someone else has posted same issue.
Just delete all the files and run ABM again. Use following command
Code:init 4 && sleep 10 && rm -rf /etc/enigma2/lamedb* && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio && rm -rf /etc/enigma2/*.del && init 3
I have done what you guys said but 4sevenHD is showing on the sports but its Sky Sport Football
Channel.png
There have been three suggestions in this thread. If you say which one you have tried, it will be easier to help you.
If you want to use the command to remove services, the guide is here:
http://www.world-of-satellite.com/sh...Linux-commands
Paste the command, don't type it!
The other method is to remove the cable/satellite services, restart, then re-run ABM
Press channel up on remote
01.jpg
Press "Green" for Satellite
02.jpg
You will then see a screen similar to this
03.jpg
Make sure Cable services is highlighted, scroll up if required.
04.jpg
Press "Menu" then scroll down to remove "cable services"
05.jpg
Confirm the removal
06.jpg
You should see that Cable services have gone.
07.jpg
Do the same for 28.2 if required
Exit out of all menus and restart
After restart, run ABM again.
If there is still an issue, please attach the debug log as per this thread.
http://www.world-of-satellite.com/sh...port-questions
The other method is to scan but not using ABM. You must set "clear before scan" to yes otherwise it won't work.
samsid (25-07-17)
OK, When a HD channel on VM changes it's name and you have the old name stored in the lamedb, Run the ABM scanner and the old name will still appear, even after a restart GUI. You need to sit on the transponder for several minutes for the channel name to dynamically update.
You will likely next see this when Sky The Open HD changes to Sky Sports Golf HD or the next Movie channel name change.