Cable Sports bouquet

[m1nz]

Hi Guys,

I have noticed that The Sports Bouquet the channels are not in order like Sky Sport 1,2,3,4,5 but also noticed channel 4HD is in the Sport Bouquet.

I have deleted and did a rescan but the same

[Bazzer]

I did an automatic scan then ran abm and it changed them quite a few others have done the same and it worked

[abu baniaz]

Easier/quicker to follow this
http://www.world-of-satellite.com/sh...l=1#post454260

I cannot replicate your issue about channel 4 HD. I am guessing you are using some modified files. No logs/modified files, so can't help further.

[zino]

Easier/quicker to follow this
http://www.world-of-satellite.com/sh...l=1#post454260

I cannot replicate your issue about channel 4 HD. I am guessing you are using some modified files. No logs/modified files, so can't help further.

I have 4Seven HD in the place of Sky Sports Football HD
and
Sky Hits HD in place of Sky Arena HD

in the Cable bouquet
on my Vu+ Solo2 (OpenViX 5.0.014)

My Vu+ Solo4K (OpenViX 5.0.016) is fine however.

Any ideas why my Cable sports channels are "wonky" on my Solo2?

[Bazzer]

Mine was the same on the Mutant HD2400 just do what Abu posted above and all will be ok

[lincsat]

Those channels are old service names associated with the Sid in the lamedb. The channels themselves will be correct, just the wrong channel name being displayed.

[zino]

Those channels are old service names associated with the Sid in the lamedb. The channels themselves will be correct, just the wrong channel name being displayed.

Thank you all.

Will we have to do this Automatic Scan every time a cable channel changes name temporarily, like the golf (sky golf, sky open) and movie channels (tom cruise, tm hanks, star trek).

Also, can I use this lamedb file to change channel names to whatever I want?

[abu baniaz]

Someone else has posted same issue.

Just delete all the files and run ABM again. Use following command

init 4 && sleep 10 && rm -rf /etc/enigma2/lamedb* && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio  && rm -rf /etc/enigma2/*.del &&  init 3

[lincsat]

Someone else has posted same issue.

Just delete all the files and run ABM again. Use following command

init 4 && sleep 10 && rm -rf /etc/enigma2/lamedb* && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio  && rm -rf /etc/enigma2/*.del &&  init 3

You only need to remove the Lamedb, that's why I suggested an option be added to ABM to remove the lamedb when run.

[m1nz]

I have done what you guys said but 4sevenHD is showing on the sports but its Sky Sport Football

Channel.png

[abu baniaz]

Post the telnet output

[abu baniaz]

There have been three suggestions in this thread. If you say which one you have tried, it will be easier to help you.

If you want to use the command to remove services, the guide is here:
http://www.world-of-satellite.com/sh...Linux-commands

Paste the command, don't type it!


The other method is to remove the cable/satellite services, restart, then re-run ABM

Press channel up on remote
01.jpg

Press "Green" for Satellite
02.jpg

You will then see a screen similar to this
03.jpg

Make sure Cable services is highlighted, scroll up if required.
04.jpg

Press "Menu" then scroll down to remove "cable services"
05.jpg

Confirm the removal
06.jpg

You should see that Cable services have gone.
07.jpg

Do the same for 28.2 if required

Exit out of all menus and restart

After restart, run ABM again.

If there is still an issue, please attach the debug log as per this thread.
http://www.world-of-satellite.com/sh...port-questions

The other method is to scan but not using ABM. You must set "clear before scan" to yes otherwise it won't work.

[Huevos]

You only need to remove the Lamedb, that's why I suggested an option be added to ABM to remove the lamedb when run.

We are not going to do that. If someone posts instructions how to reliably reproduce the bug we could fix it.

[lincsat]

We are not going to do that. If someone posts instructions how to reliably reproduce the bug we could fix it.

OK, When a HD channel on VM changes it's name and you have the old name stored in the lamedb, Run the ABM scanner and the old name will still appear, even after a restart GUI. You need to sit on the transponder for several minutes for the channel name to dynamically update.

You will likely next see this when Sky The Open HD changes to Sky Sports Golf HD or the next Movie channel name change.

[Huevos]

OK, When a HD channel on VM changes it's name and you have the old name stored in the lamedb, Run the ABM scanner and the old name will still appear, even after a restart GUI. You need to sit on the transponder for several minutes for the channel name to dynamically update.

You will likely next see this when Sky The Open HD changes to Sky Sports Golf HD or the next Movie channel name change.

ABM deleting lamedb is not going to cure that. And also deleting lamedb would break services not included in the ABM scan.