I have been running one of the last OpenMB (OpenPLi based) (2016-09-22) images on my MB Ultra (T2+S2), and was running older builds when they were still being developed.
As this project is dead, and the repos are gone, I would like to upgrade to something that is actively being supported and was recommended to try OpenVIX, as there is no OpenPLi development for this box.
The install worked fine, and it refused to restore the backup, probably for version issues, so I did a channel scan.
There is massive pixelisation on most DVB-T2(T?) channels, which are not due to tuning to the wrong tower. Some unencrypted HD channels work fine on one mux, while all encrypted channels on the same mux suffers from massive pixelisation.
I have verified that I am using the same frequency as with the OpenMB image.
I have also tried the latest OpenATV and Egami images, all suffer from the same issue, so I assume it is a common issue with the later images.
OpenATV offered to restore the backup from OpenMB, so I did not have to do a channel scan there, so should be the exact same setup as the one working fine on OpenMP
Restoring to OpenMB is a workaround, but I would like to get off this dead end.
I have another MB Ultra (T2+2xS2) in the cabin, but I have not had a chance to try to upgrade that one.
Now that I'm trying to describe the issue there is one thing that may be relevant. The T2 tuner in the box I have problems with was first added to the box in the cabin, which originally came with 2xS2 tuners, and it was suffering from some pixelization when it was installed in that box, but both boxes worked OK when I swapped the T2 tuners between the boxes. Perhaps it is a problem with the new T2 tuner I bought?
Is there anything I can try to debug the issue before I get to the cabin?
Thanks