Have you tried using the drivers from 4.1.015 & putting them in 5.0.020?
Sent from my iPhone using Tapatalk
Have you tried using the drivers from 4.1.015 & putting them in 5.0.020?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
satnut2 (01-07-17)
The only difference between your setup and mine until recently (now its all changed so cannot compare) is you have a motorised setup on one tuner. I could run with 3 SAT tuners to 2 sat dishes and watch/record etc without issue on any release in recent times.
So I would say that either I was dead lucky or you have a specific issue involving the motorised setup.
Cannot remember if you tried without the motorised or not?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
satnut2 (01-07-17)
Moving from a working 4.1.015 to 4.2. or 5.0. will have required a reflash with no settings restore, so maybe there is a problem with your settings??
Maybe this will help....
http://www.world-of-satellite.com/sh...older-than-4-2
Last edited by ccs; 01-07-17 at 10:38. Reason: Add link
satnut2 (01-07-17)
Hi Andy , I havent , I'm really not sure how to ? any pointers ?
@twol this afternoon Ive disconnected the motorised dish and disabled tuner D where it was connected
I'm now running with 3 tuners only , I'll carry out some testing this afternoon / tonight and see how I get on
Can I also ask when in customise settings , I have prefered tuner set to 'Auto' , I also have prefered tuner for recordigns set to 'auto' is this correct ?
Thanks for all the comments guys
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
satnut2 (01-07-17)