multi tuner boxes need 1.38 to be used and even use it on my single tuner boxes.
multi tuner boxes need 1.38 to be used and even use it on my single tuner boxes.
Had to restart 1.38 this morning
as advised by Andy Hazza ,mgcamd with good mg.cfg or better still oscam, a little more difficult,but not too much, but worth the effort .Just to add there is a later version of mgcamd 1.45, if you want to try that
Last edited by samsid; 20-08-17 at 14:52.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I have honestly never had an issue with having to restart MGCam before. Only started happening recently. Anyway I bit the bullet and setup Oscam. I got there after a little bit of working out. Up and Running and hopefully no restarts required !!