Hi Everyone, I had set the Power Timer to Deep Sleep and at a much later time to wakeup to Standby mode. But it is able to go to Deep Sleep and Wakeup to power-on but didn’t go to Standby mode. Please help. Thanks very much
Hi Everyone, I had set the Power Timer to Deep Sleep and at a much later time to wakeup to Standby mode. But it is able to go to Deep Sleep and Wakeup to power-on but didn’t go to Standby mode. Please help. Thanks very much
Show pictures of your power timers. Use Webif and attach pictures here so we can see.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
bumperbee (20-03-17)
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
bumperbee (20-03-17)
Hi Andy & Birdman
Thanks very much for the reply.
@Andy, please see attached if it’s what you ask for.
@Birdman, I mean it did wakeup but didn’t go to standby.
Best Regards
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
bumperbee (20-03-17)
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
bumperbee (20-03-17)
Hi Adm, when I open Webif in browser in my Pc, I could not find Power Timer setting. But I had managed to take a picture of the Power Timer setting on Tv screen using ScreenGrabber. Hope this is what you need to see and if it’s still not correct, please let me know and I will try again.
Hi Birdman, I may need to add new Timer recording and sometime setting.
That Powertimer setting is telling the box to shutdown at 01:15 each night, then wakeup to standby at 04:00.
You could set two timers. One to shutdown and the other to wake-up to Standby and see whether that works..
But I still don't understand why you want to wake the box up to Standby.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
bumperbee (21-03-17)
Probably succumbed to the myth that EPG should be obtained at 04:00.
bumperbee (21-03-17)
@Birdman, I try and see. Thanks
@Abu, thanks for the info, any suggestion that I should try?
There is an urban myth that bouquets and EPG should be created/obtained at 04:00. Sky receivers do not even wake up until 06:00, I wouldn't do anything before this time. You get scenarios where people set the receiver to wake up, do the Bouquet/EPG and then go back to deep sleep and then wake up a few hours later. Surely it would be better to wake up fifteen minutes before the normal wake-up time and do the operations then? If you have a twin tuner receiver, the activities can go on in the background unless you are recording something.
Set whatever time suits your household/viewing activities.
As an example, if your receiver currently does the 04:00 EPG and goes to sleep/standby again and then wakes up later wakes up at 07:30, set it to wake up to standby at 07:15 and do the Bouquets and EPG then. We had ours set at 15:15, timed with the school run.
Sky 28.2 changes are usually Tuesday and Thursday, so no need for daily ABM runs in my opinion.
Hi Abu, thanks for the advice!
I had separated the timers and still the wakeup feature is at Switch-On and didn’t go to standby. Please advise!
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
bumperbee (22-03-17)