Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 9 of 9

Thread: Strange tuner behavior

  1. #1

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    116
    Thanks
    3
    Thanked 6 Times in 5 Posts

    Strange tuner behavior

    I recently found that the box is trying to use a tuner on a fixed 28.2 dish when I try to look at channels on 19.2, it switches to tuner I, which the motor dish is normally on, if I pick any other satellites like 23, 16, 13 etc.
    I have tried re-configuring the tuners with the motor dish on A or B but the box still tries to use one of the fixed dish tuners for 19.2.
    Have tried 3 different settings packages but no difference.
    I can get tuner I to put the dish on 19.2 with the manual scan settings but it goes straight back to trying to use tuner A when I go back to the channel list for 19.2.
    Only other thing I can think of is trying another image, which I would rather avoid as tried a couple when I first got the Solo 4K and could never get oscam to work on them.

    Openvix 4.2.028

  2. #2
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,581
    Thanks
    2,004
    Thanked 4,925 Times in 3,259 Posts
    Please post a simple step by step how to reproduce the issue.
    Help keep OpenViX servers online.Please donate!

  3. #3

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    116
    Thanks
    3
    Thanked 6 Times in 5 Posts
    Select a channel on 19.2E from the channel list, press OK twice, screen goes blank, no motor dish movement indication, then message comes up saying tune failed and info bar at the bottom of screen is indicating tuner A is being used.

  4. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,339
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    when you go to tuner configuration and select advance, the first satellite is 19.2. You may have changed setting on that but not realised.

    Go into advance and double check 19.2

    I made same mistake and took a while to realise what had happened.

  5. #5

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    116
    Thanks
    3
    Thanked 6 Times in 5 Posts
    Wondered if I was going to be very embarrassed there but have checked again and tuners A and B are both set to 28.2 only, tuner I is set to simple and positioner.
    To double check I set tuner A as the preferred tuner and it receives channels off 28.2, I had noticed when preferred tuner was set to auto that it always seemed to use tuner B.
    Also tried a few different satellites again and same thing still happening only on 19.2.

  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,339
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Upload your settings file. You will find it in /etc/enigma2. You have to zip it before you can attach it.

  7. #7

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    116
    Thanks
    3
    Thanked 6 Times in 5 Posts
    Not sure if I still have a relevant settings file, I put Openpli on the box earlier and can view channels on 19.2 with it. Used same notes I set Openvix tuners etc., up from and same malimali settings files.
    Last edited by Tangfolio; 02-02-17 at 16:29.

  8. #8
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,339
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    The file called "settings", not channel data. Almost all the settings of the receiver are contained in the file called "settings" located in /etc/enigma2

  9. #9

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    116
    Thanks
    3
    Thanked 6 Times in 5 Posts
    Nothing was happening when I clicked on 'manage attachments' so copied contents of settings file below. I have altered the lat/long info.

    config.audio.volume=80
    config.autobouquets.area=4099#69#4103
    config.autobouquets.default=false
    config.autobouquets.extra=false
    config.autobouquets.ordering=true
    config.autobouquets.piconfolder=4
    config.autobouquets.piconlink=4
    config.autobouquets.piconstyle=1
    config.autobouquets.sort=2
    config.autolanguage.equal_languages=0
    config.autolanguage.subtitle_usecache=false
    config.av.osd_alpha=213
    config.av.scaler_sharpness=17
    config.av.videomode.DVI=2160p
    config.av.videoport=DVI
    config.av.videorate.2160p=multi
    config.hdmicec.enabled=false
    config.misc.do_overscanwizard=false
    config.misc.firstrun=false
    config.misc.graph_mepg.extension_menu=true
    config.misc.graph_mepg.items_per_page=12
    config.misc.graph_mepg.items_per_page_listscreen=1 5
    config.misc.graph_mepg.OKButton=zap
    config.misc.graph_mepg.prev_time_period=240
    config.misc.graph_mepg.roundTo=3600
    config.misc.hotkey.additional_keys=true
    config.misc.hotkey.green=Module/Screens.TimerEdit/TimerEditList
    config.misc.hotkey.red=Module/Screens.PluginBrowser/PluginBrowser
    config.misc.hotkey.showTv=Plugins/Extensions/GraphMultiEPG/1
    config.misc.initialchannelselection=false
    config.misc.languageselected=false
    config.misc.lastrotorposition=192
    config.misc.rcused=0
    config.misc.showrotorposition=yes
    config.misc.startCounter=2
    config.misc.videowizardenabled=false
    config.movielist.videodirs=['/hdd/movie/']
    config.Nims.0.advanced.lnb.1.lof=unicable
    config.Nims.0.advanced.lnb.1.scrList=1
    config.Nims.0.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.0.advanced.lnb.1.unicableProduct=IDLB-QUDL42-UNI2L-1PP
    config.Nims.0.advanced.sat.282.lnb=1
    config.Nims.0.advanced.sats=282
    config.Nims.0.configMode=advanced
    config.Nims.1.advanced.lnb.1.lof=unicable
    config.Nims.1.advanced.lnb.1.scrList=2
    config.Nims.1.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.1.advanced.lnb.1.unicableProduct=IDLB-QUDL42-UNI2L-1PP
    config.Nims.1.advanced.sat.282.lnb=1
    config.Nims.1.advanced.sats=282
    config.Nims.1.configMode=advanced
    config.Nims.2.advanced.lnb.1.lof=unicable
    config.Nims.2.advanced.lnb.1.scrList=3
    config.Nims.2.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.2.advanced.lnb.1.unicableProduct=IDLB-QUDL42-UNI2L-1PP
    config.Nims.2.advanced.sat.282.lnb=1
    config.Nims.2.advanced.sats=282
    config.Nims.2.advanced.unicableconnected=true
    config.Nims.2.configMode=advanced
    config.Nims.3.advanced.lnb.1.lof=unicable
    config.Nims.3.advanced.lnb.1.scrList=4
    config.Nims.3.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.3.advanced.lnb.1.unicableProduct=IDLB-QUDL42-UNI2L-1PP
    config.Nims.3.advanced.sat.282.lnb=1
    config.Nims.3.advanced.sats=282
    config.Nims.3.advanced.unicableconnected=true
    config.Nims.3.advanced.unicableconnectedTo=1
    config.Nims.3.configMode=advanced
    config.Nims.8.diseqcMode=positioner
    config.Nims.8.latitude=54.000
    config.Nims.8.longitude=1.000
    config.Nims.8.longitudeOrientation=west
    config.Nims.8.powerMeasurement=false
    config.plugins.autotimer.add_to_channelselection=t rue
    config.plugins.autotimer.add_to_epgselection=true
    config.plugins.autotimer.add_to_multiepgselection= true
    config.plugins.autotimer.delay=3
    config.plugins.autotimer.editdelay=3
    config.plugins.autotimer.editor=plain
    config.plugins.autotimer.interval=12
    config.plugins.autotimer.maxdaysinfuture=0
    config.plugins.autotimer.notiftimers=true
    config.plugins.autotimer.popup_timeout=5
    config.plugins.autotimer.show_help=false
    config.plugins.autotimer.show_in_extensionsmenu=tr ue
    config.plugins.autotimer.style_autotimerslist=adva nced
    config.plugins.autotimer.timeout=5
    config.plugins.configurationbackup.backupdirs=['/etc/default_gw', '/etc/enigma2/', '/etc/hostname', '/etc/network/interfaces', '/etc/resolv.conf', '/etc/wpa_supplicant.ath0.conf', '/etc/wpa_supplicant.conf', '/etc/wpa_supplicant.wlan0.conf']
    config.plugins.configurationbackup.backuplocation=/media/hdd
    config.plugins.SetupZapSelector.event=2
    config.plugins.SetupZapSelector.history=10
    config.plugins.SetupZapSelector.number_zap=true
    config.plugins.SetupZapSelector.picon=true
    config.recording.keep_timers=7
    config.recording.margin_after=2
    config.recording.margin_before=0
    config.recording.offline_decode_delay=1000
    config.seek.selfdefined_13=15
    config.seek.selfdefined_46=60
    config.seek.selfdefined_79=300
    config.subtitles.dvb_subtitles_backtrans=255
    config.subtitles.dvb_subtitles_centered=false
    config.subtitles.pango_autoturnon=false
    config.subtitles.pango_subtitle_fontswitch=false
    config.subtitles.subtitle_borderwidth=1
    config.subtitles.subtitle_fontsize=16
    config.subtitles.subtitle_position=0
    config.timezone.val=(GMT) Greenwich Mean Time : Dublin, Lisbon, London
    config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.ukcvs00.tv" ORDER BY bouquet;
    config.tv.lastservice=1:0:1356:830:2:11A0000:0:0:0::Travel Channel
    config.unicable.unicableManufacturer=Inverto
    config.unicable.unicableProduct=IDLB-QUDL42-UNI2L-1PP
    config.usage.allowed_timeshift_paths=['/media/hdd/']
    config.usage.channelselection_preview=true
    config.usage.enable_tt_caching=false
    config.usage.menu_sort_weight={'mainmenu': {'submenu': {}}}
    config.usage.movielist_trashcan_days=8
    config.usage.movielist_trashcan_reserve=40
    config.usage.multiepg_ask_bouquet=true
    config.usage.record_indicator_mode=1
    config.usage.recording_frontend_priority=-1
    config.usage.service_icon_enable=true
    config.usage.servicelist_column=300
    config.usage.show_infobar_on_skip=false
    config.usage.show_second_infobar=5
    config.usage.swap_snr_on_osd=true
    config.usage.zap_with_ch_buttons=true

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.