did you have ftp with green light in your os regards john
did you have ftp with green light in your os regards john
Thanks for the reply but I'm not exactly sure what you mean john?
The DCC connected with my VU box but just would not connect to my router for some reason. It showed up when I searched but simply would not connect. Anyway, I've gone back to where I was originally now (Blackhole) so problem solved - for now at least
Thanks again
I use DCC and have found recently, on the connection screen it show the line to my router in red but I can still go to the FTP page and use it normally. (FTP Connected and Telnet Connected both have green against them at the bottom.)
BRAVEHEART (16-12-16)
An older version works fine. I believe version 1.41.
Alternatively use:
Notepad++ as the default text editor
Filezilla for transfers
Putty for issuing commands
Thanks guys for the additional replies
I did actually try that techygirl and it seemed to work but when I rebooted nothing had transferred.
What is even more confusing is that this only happened when I installed OpenVix. When I went back to B hole again everything starts working as it should again...?? Got me beat anyway
Choosing an image because of or lack of a tool such as DCC is beyond me, don,t people like a little challenge to learn alternative means?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
techygirl (17-12-16)
i prefer DCC too for all my 2p's input is worth. be great if they updated it though or someone did.
VU+DUO (Genuine box - not a clone)
FIXED 28.2e DISH
System OE:OE-Alliance 3.4
Firmware version:OpenViX 4.2.021 (2016-12-06)
Kernel / Drivers:3.9.6 / 20151124
Willman (17-12-16)