have a recording off a usb tuner and pc just seeing if it helps to get netid for Kildare ireland
have a recording off a usb tuner and pc just seeing if it helps to get netid for Kildare ireland
You must obtain a raw transport stream recording. Yours is a normal video file.
What tuner are you using?
There is nothing to forgive. Well done for stating something is not clear. Not many do.
You would need to use dvbviewer software. I don't know if this will work with your card. We already have a recording from a legacy area. I would not like anyone to fork out money to buy software/hardware. Far easier to check an official receiver if you can find the menu
I bought a Sundtek tuner. It can capture the raw stream data.
Guide is here:
http://www.world-of-satellite.com/sh...ream-Recording
Alternatively, you can try using dvbsnoop on your receiver.
install it with
Tune to a cable channel preferably on the home transponder.Code:opkg install dvbsnoop
Then run each of these commands one at a time. The data will be saved to the hdd.
Code:dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x40 -m 0xFF -n 500 0x10 > /hdd/data-10-40.txt dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x41 -m 0xFF -n 500 0x10 > /hdd/data-10-41.txt dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x42 -m 0xFF -n 5 0x11 > /hdd/data-11-42.txt dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x46 -m 0xFF -n 500 0x11 > /hdd/data-11-46.txt
If you do not have a hdd mounted, use the following. Save to PC before running next one to avoid the flash memory getting full.
Code:dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x40 -m 0xFF -n 500 0x10 > /tmp/data-10-40.txt dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x41 -m 0xFF -n 500 0x10 > /tmp/data-10-41.txt dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x42 -m 0xFF -n 5 0x11 > /tmp/data-11-42.txt dvbsnoop -s sec -tn -timeout 3000 -ph 2 -pd 4 -f 0x46 -m 0xFF -n 500 0x11 > /tmp/data-11-46.txt
Lraizer's cable plugin may work using first found. It does not place the channels into official bouquets though.
http://www.world-of-satellite.com/sh...ts-E2-UK-Cable
It should stop on each run within a few minutes. Othewise stop it manually after 5. "ctrl" & "c" will stop it
do it when it is convenient
just stop it after 5 minutes.
abu baniaz (12-12-16)
I have added two new regions that your debug log showed, 43219 and 43220. Please update the config files using the option in ABM menu.
Before you try them, make a settings backup so you can revert if needed. Can you also upload the lamedb and lamedb5 files as attachments. You will find them in /etc/enigma2/
If the new areas work, you will still experience this issue for time being
http://www.world-of-satellite.com/sh...l=1#post416718
Bangord30 (15-12-16)
getting timeout for tuner lock
IMG_20161215_205111.jpg
This post is just for notes. Ignore it.
The transport streams/frequencies/transonders from the lamedb5 are:
Code:t:ffff0000:0033:0601,c:442000:6875000:2:5:0:0:0 t:ffff0000:0034:0601,c:458000:6875000:2:5:0:0:0 t:ffff0000:0035:0601,c:388000:6875000:2:5:0:0:0 t:ffff0000:0036:0601,c:450000:6875000:2:5:0:0:0 t:ffff0000:0037:0601,c:410000:6875000:2:5:0:0:0 t:ffff0000:003a:0601,c:324000:6875000:2:3:0:0:0 t:ffff0000:003b:0601,c:396000:6875000:2:5:0:0:0 t:ffff0000:003c:0601,c:364000:6887000:2:5:0:0:0 t:ffff0000:003d:0601,c:418000:6875000:2:5:0:0:0 t:ffff0000:0040:0601,c:514000:6875000:2:5:0:0:0 t:ffff0000:0041:0601,c:522000:6875000:2:5:0:0:0 t:ffff0000:0042:0601,c:530000:6875000:2:5:0:0:0 t:ffff0000:0043:0601,c:538000:6875000:2:5:0:0:0 t:ffff0000:0044:0601,c:466000:6875000:2:5:0:0:0 t:ffff0000:0045:0601,c:562000:6875000:2:5:0:0:0 t:ffff0000:0046:0601,c:474000:6875000:2:5:0:0:0 t:ffff0000:0047:0601,c:546000:6875000:2:5:0:0:0 t:ffff0000:0048:0601,c:554000:6875000:2:5:0:0:0 t:ffff0000:0049:0601,c:570000:6875000:2:5:0:0:0 t:ffff0000:004a:0601,c:578000:6875000:2:5:0:0:0 t:ffff0000:004b:0601,c:586000:6875000:2:5:0:0:0 t:ffff0000:004c:0601,c:594000:6875000:2:5:0:0:0 t:ffff0000:0038:0601,c:348000:6887000:2:5:0:0:0 t:ffff0000:0039:0601,c:356000:6887000:2:5:0:0:0 t:ffff0000:003e:0601,c:339500:6887000:2:5:0:0:0 t:ffff0000:003f:0601,c:372000:6887000:2:5:0:0:0
Download this file.
Unzip/extract it.
Transfer to /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers
In ABM disable all other providers.
Select Kildare lcnbat2
Test one at a time. post back with which works best for you.
hi thanks all of them bring in the bouquests and all, but getting tuner failed on them the only ones that seem to work is rte1 hd ans sky sports mix.
the funny thing is I got the netid of 43226 to work it brings in 174 tv channels and 31 radio channels they all work fine so think Kildare must be using that netid of 43226
ive run a new dvbsnoop on sky Disney hd