Im using a technomate box and vix image 4.0 build 03
Read a lot of threads on here about formatting sd card to 3 or 4
When i try to do this it says file found in fat32 error.
Used ftp to put my picon folder in right place and they still wont show
Any advice is welcomed
In your channel selection settings do you have Show Picons in service list to"yes"
Mutant HD2400 , 2 x DVB-S/S2, 2x DVB-T/T2/C ,OpenVix version 5.1.0028 , Simple Ten Eighty skin , and Tosh picons , remote Harmony 650, Amazon firestick
Yes i do mate
Ive followed lots of guides from internet and settings they all seem to tally up
Ive just found another usb to try to convert to file 4 or what ever it is going to see if the picon folder will load soon as ive done it
Ok so found the usb on the ftb control center im using
Uploaded some snp mk picons
Got no displayable medium found on usb message
Deleted the whole folder then added picons by croke
Same message ..
Tried putting the folders into enigma2 folder
Still nothing..
Gone to downloads on the box and i have lots of picon files to choose from snp
And some from tv east but non say 28.2???
Can you post a picture showing the location of your picon folder incluidng full path?
Sorry what does one mean full path?
The whole path of the location where you have saved the picons/directory tree.
If that still does not make sense, please say so
...............
Last edited by sanderson2; 27-03-16 at 01:28.
20160327_002600.jpg
Im really stupid so i hope this is correct
open up the picon folder then take a screenshot.
"PrtScn" will copy what ever is on the screen
"Alt" and "PrtScn" will copy what ever is on the active screen.
You can then paste in mspaint and save/edit the image. Then upload.
Can you also try enabling debug logs and then attaching them. You will find them in /home/root/logs
sanderson2 (28-03-16)
good afternoon i have managed to take a screen shot of the picon folder. i also managed to get into the root and crash log but there is far to much into in ther to save the screen shot as most of it would not be on it?
picon pic.jpg
Last edited by abu baniaz; 27-03-16 at 14:41. Reason: tidy up
Your picon layout for that folder is fine.
Crashlog is of no use. Debug log is what will be beneficial. Transfer the debug log from the receiver to your PC. Then attach it to the post. Please attach it, do not paste it.
To enable debug logs:
Menu -> Setup -> System -> Logs -> Enable debug logs = yes
Reboot system for change to take effect.
The default location for debug logs is /home/root/logs
Enigma2-2016-03-27_18-11-56.log
hope this is right?
OK, picon path is the one you posted picture of.
I think I know what the issue is. Just to confirm what I am thinking, can you post a scrennshot of your AutoBouquets E2 settings page. Can you alos take a screenshot of a bouquet open, i.e showing the list of channels. There is a guide on screenshots in my signature if you need it.Code:< 549.564> [Picon] adding path: /usr/share/enigma2/picon/
Posting Permissions
Reply With Quote