I have download the following Picons for 42e and 28.2e to my HDD and done an install. I can see them on my hdd in the following folder: /media/hdd/picon. How can I active all the icons for these two location to work on my box
I have download the following Picons for 42e and 28.2e to my HDD and done an install. I can see them on my hdd in the following folder: /media/hdd/picon. How can I active all the icons for these two location to work on my box
Have you restarted Enigma 2 -- if not -reboot and should be okay.
You do not have to activate the location. The image has a list of locations to check and will use the location it finds. It will only use one location.
Please explain how you have "done an install". Provide as much detail as possible. Normally when you install a picon ipk, it installs to the lcoation set in the ipk. It is not usually /media/hdd
Do you have more than one picon folder on your system? Your debug log will show what location has been selected.
Are the picons correct, i.e they match the service references of the channels?
What I mean by install. Is that I added them from the plug in and after selected the medium as the hdd it install them to my harddrive. . I only have one picon folder on the hdd. After a number of restarts I still cannot see the picons. I have done the channels selection setting as well.
Debug logging is enabled as follows:
Menu -> Setup -> System -> Logs -> Enable debug logs = yes.
You must restart receiver to activate this. You will find the logs in /home/root/logs/
There will be an entry like this
Code:[Picon] adding path: /media/hdd/picon/
Bangord30 (15-02-16)
Enigma2-2016-02-15_12-00-08.log
attached is the log file
Capture.jpg
see all the path on my system
can you upload your picons to this thread please? you will need to zip them first.
please do the same with lamedb file. it is located in /etc/enigma2
Hi,
if there is also a directory /share/enigma2/picons which on wins? I am quite sure that /hdd is quite at the end of allowed directories.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
There is no directory called picons under /share/enigma2/. I will now zip and upload the other files.
picon.zip
picons files zapped and attached
lamedb file in etc/enigma2 please
lamedb.zip
lamedb file attached
I'll try and look at them for when I get home.