Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18
  1. #16
    Forum Supporter
    Donated Member
    baz2011uk's Avatar

    Join Date
    Oct 2015
    Posts
    83
    Thanks
    11
    Thanked 7 Times in 5 Posts
    Quote Originally Posted by birdman View Post
    Unless you routinely stream from the box yourself then it TX total should be quite low. Given that VM were reporting you as using 91GB then it would show up like a sore thumb.
    The figure should take quite some time after boot to reach 1MiB. If the box is sending the data it will be getting into the GiB range.
    Hi Birdman
    i am 100% sure its not the receivers from 8pm to 1am (5 hours) i have been watching them every hour to see the amount used via the telnet command
    receiver A RX used 3.3mib and TX used 25mib the TX jumped around 17mib from 23.45 and 00.15 ish other than that its been creeping up slowly around 500kib every hour
    receiver B RX used 1.2mib and TX used 150kib
    receiver C RX used 2.4mib and RX used 1.1mib

    i have also been keeping an eye on the router data and it seems like its being good from 17.30 to 00.30 (7 hours) my total DL was 2392mb and upload was 101mb thats with all devises switched on and connected as normal only thing i have not done this evening is download any content from newsgroups

    my main concern is the receivers do they look ok from the data above i have not streamed any content using the boxes at all so is it reasonable to have a little amount of upload on each receiver? i going to sound even thicker now but what would the receivers be uploading?

    thanks again for your time
    Last edited by baz2011uk; 10-02-16 at 02:29.

  2. #17
    ViX Beta Tester birdman's Avatar

    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    3,665
    Thanks
    69
    Thanked 785 Times in 624 Posts
    Quote Originally Posted by baz2011uk View Post
    my main concern is the receivers do they look ok from the data above i have not streamed any content using the boxes at all so is it reasonable to have a little amount of upload on each receiver? i going to sound even thicker now but what would the receivers be uploading?
    It's counting the total bytes sent on the connexion. So the fact that you were logged in and looking at data was sending bytes in both directions. All connexions send a certain amount of data in both directions to control flow, socket set-up etc.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 4(1 USB)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  3. #18
    Forum Supporter
    Donated Member
    baz2011uk's Avatar

    Join Date
    Oct 2015
    Posts
    83
    Thanks
    11
    Thanked 7 Times in 5 Posts
    Quote Originally Posted by birdman View Post
    It's counting the total bytes sent on the connexion. So the fact that you were logged in and looking at data was sending bytes in both directions. All connexions send a certain amount of data in both directions to control flow, socket set-up etc.
    Thanks birdman makes seance now the TX mib was pretty low so didnt worry me to much but needed to ask as its all new to me but sort of get it now

    thanks for confirming will keep an eye on my router data to see if i see another spike on the uploads again but so far this evening its been pretty good from what i can tell

    cheers baz

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •