Support of single-LNB/satCR/unicable?

[bentleyboys]

Thanks Guys wheres the file located so i can amend it to suit?

Thanks again

[2stein]

if knew it by heart i would have given it right away... but... it's something like /usr/share/enigma2/... or /etc/enigma2/... or something else

[bentleyboys]

Thanks2Stein

I will have a look for it :-)

Thanks again

[bentleyboys]

It was the first option

Copied it off box added extra scrs as directed still only getting 4 tuners available had a thought maybe need to set tuner A = Tuner B or set to loop through could this be the issue?

Can see 8 in list now and can se;ect them but only A to D works

Thanks again

[zino]

you only need one cable connected to tuner a. all other tuners will be configured to connect internally.

So, when using Solo 4K FBC Tuners with Unicable LNB, only Tuner A is plugged into the Unicable LNB, nothing is plugged into Tuner B?
Seems odd.

[bentleyboys]

yes unicable in lnb1 nothing in lnb2
just set each tuner to a sequential scr number and matched frequency

get signal on tuner A, on b get 100% signal for 2 seconds then nothing, same on others too?

If i set one of the other 4 scr unicable lnbs i get 4 tuners ok but obviously not 8