cabling motorised dish for solo2

[roy0110]

can someone please link me to a cabling diagram for USALS motorised setup?
the satellite installer i used replaced a single lnb with a quad, fed 2 cables directly from the lnb into my receiver assuring me i could view one channel while watching another.
while this is true, i can no longer switch to other satellites (from 28.2E) obviously because there is no feed to the motor.
any help will be much appreciated.

[abu baniaz]

This should be the one to use.

The tuner that goes direct to LNB should be configured as "2nd cable of motorised LNB)