Would you get better signal from a cable connected to an LNB as opposed to a cable going via a Diseqc Motor?
So if I had a LNB with two outputs would I get a better out put with the one that connected direct to the LNB, or would it not make any real noticable difference?
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
as far as i am aware ther wont be a noticable difference infact dnt think there will be any change at all
this is only a theory but i would suspect the motor playing its part as an inline amp
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
DrProzac (21-12-10)
i have used the same diseqc motor and lnb for 7 years and the signal is better than that on my sky dish,
DrProzac (21-12-10)
I'll have to get a twin LNB and test then
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Posting Permissions
Reply With Quote
