USB not showing after update

[Willmoore]

I went to do some maintenance on my picons (transfer latest MK picons) using Filezilla but I can not locate /media/hdd/usb/picon It was there prior to updating to the latest image. It does not show in Mount Manager, also, using telnet command af -h it is not showing there either.

The Solo must be reading the usb as the picons are showing as they should be. I have switched off/on, removed/replaced the usb but no joy.

Anyone know where my usb has gone

[abu baniaz]

/media/hdd/usb/picon
This would mean your USB stick is inside the HDD.

You should be using one of the following:
/media/hdd/picon
/media/usb/picon


should be df -h not af -h

[abu baniaz]

A reminder again...

Post in image support section please.

[Willmoore]

Did it from memory (as I can not see it) question remains - where is my usb as it is not showing in /media/usb/picon where as it was prior to update.

It was df -h I used and it's not showing there.

Once again sorry for posting in the wrong section - (there have been times I have not posted a question for fear of putting it in the wrong section.)

[abu baniaz]

If your question is about the image, ask in the image support section.
If your question is about ABM, ask in the ABM section?
If your question is about Cross EPG, ask in Cross EPG section.
If not sure, ask in Image suppport section. There are mandatory questions in there. We can always movbe it later. Not the end of the world.


It is possible your USB device is not mounted or mounted as something else.
Menu > Information > Devices

Blue > Vix > Mount Manager (you say this is not working)

The debug logs will show what location is being used for the picons.

[Willmoore]

Menu > Information > Devices USB not showing - only HDD shows

Blue > Vix > Mount Manager USB not showing - only HDD shows (usb has never shown here and was the subject of another post that was never resolved)

The debug logs will show what location is being used for the picons When trying to view the debug logs the unit just reboots !

All sorted - transferred data to another usb and it now shows again. (also shows in mount manager now)