Changing Picons to MK

[Willmoore]

I want to change the picons I have installed to the MK picons. I have downloaded them to a folder on my laptop. Using Filezilla I can see the currently installed picons on my Solo - what do i do with the already installed picons, delete them ? with the MK picons do i drag & drop the folder or the individual picons ?

If you think this is a stupid question you should see some of the others I have asked :-)

[casuk]

Yes delete old picons from picon folder in the solo and upload the MK picons from pc to that picon folder in solo and thats you reboot

[sensui619]

i have also done the above but unfortunately the new MK picons are not showing. I am using ABM (Cable) Autobe2 (Sat). Any different configuring required?

Gigablue UE800 +
Hades 008

[pembo]

make sure there's only one picon folder, e.g. /hdd/picon (i.e. the images are within the root of the picon folder)

[abu baniaz]

Have you enabled the feature to print number next to channel name?

If yes, where are you saving the picons and what file system is it in?

[sensui619]

Previous picons worked i deleted folder uploaded folder and rebooted box.

Where is that feature print number next to channel.

Also for some reasons some picons are still appearing which are the old ones

[abu baniaz]

Also for some reasons some picons are still appearing which are the old ones

You still have the old picons somewhere. telnet the following command and post back results

find / -name picon

Where is that feature print number next to channel.

See picture

You have not answered a question. It was asked because it is important.

[sensui619]

Just did above and rebooted box after re scanning for sly and vm channels, new picons are not showing yet still showing a few old which are not located on my hdd anymore as i deleted the folder and uploaded MK ones.

Strangely enough MK picons are showing when accessing giga via openwebif under epg guides

[judge]

Sounds like you have picons stored in more than 1 location or you haven't restarted E2 since removing them.
Do as Abu suggests & issue:

find / -name picon

in a telent session to see what picon locations are being used.

[sensui619]

Done the above it only brings back results media hdd.

No others found. Yes i restart the box. Did restarr and power off/on

I can see the images on openwebif but not the skin or led screen

[sensui619]

it has found this which is correct /media/hdd/picon. i have even deleted the folder and uploaded folder still the same. may need to reflash or does this not work with autobe2

[abu baniaz]

Can you post a screenshot of your autobouquets settings.

Can you also post a screenshot showing your infobar as pictured here. A guide to screenshots is in my signature.

[sensui619]

Im currently not at home but had time to get autobe2 settings.

Please find it attached settings20150609_183934.jpg

[abu baniaz]

We look forward to the second picture.

[sensui619]

Please see below20150610_180455.jpg