Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: ABM - Tuner Lock Timed Out

  1. #1

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Angry ABM - Tuner Lock Timed Out

    I've just got a xpeed lx2 from WOS. I'm running Apollo 0.70 and when I'm running ABM im getting the tuner lock time out message. It has 2 tuners 1 x satellite (1st Tuner) and 1 x cable / terrestrial (Second Tuner) I only have a sky cable on the 1st tuner and it's setup as simple single 28. The second tuner has nothing plugged in as I don't have cable in the area so I've set that to nothing connected. I'm assuming that it's trying to use the second tuner and that's why its failing so how do I disable the second tuner or force it to use the 1st tuner?



    Software
    System OE: OE-Alliance 2.3
    Distro: openvix
    Firmware version: Apollo.070
    Driver date: 20141008
    Kernel version: 3.12.1
    Gui version: 2014-10-28
    Tuners
    Tuner A: DVB-S2 INTERNAL (DVB-S2)
    Tuner B: DVB-T/T2 NIM (DVB-T2)

  2. #2
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,262
    Thanks
    1,720
    Thanked 9,461 Times in 6,675 Posts
    Please try to run ABM during playback of a recording.

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  3. #3

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts
    No that didn't work. Any other ideas?

  4. #4
    Peterj's Avatar
    Title
    ViX Beta Tester
    Join Date
    Jul 2013
    Location
    Veendam
    Posts
    1,264
    Thanks
    600
    Thanked 625 Times in 432 Posts
    Do you have timershift activated or do a streaming at the same time?
    This can also give a locked tuner.

  5. #5

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts
    No, no time shift and no timers running and nothing's streaming

  6. #6
    Peterj's Avatar
    Title
    ViX Beta Tester
    Join Date
    Jul 2013
    Location
    Veendam
    Posts
    1,264
    Thanks
    600
    Thanked 625 Times in 432 Posts
    can you remove the dvb-c/t tuner and try again?

  7. #7

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Ill get someone to check the dish and LNB first, I don't want to void the warranty on the first day I have it.

  8. #8
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts
    You have not mentioned what settings you are using for ABM.

    Can you scan conventionally?

  9. #9
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,262
    Thanks
    1,720
    Thanked 9,461 Times in 6,675 Posts
    Quote Originally Posted by Needanalias View Post
    Ill get someone to check the dish and LNB first, I don't want to void the warranty on the first day I have it.
    You won't. Those STB's are made for adding hardware, just like a PC.

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  10. #10

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts
    The reason i said I'd check the dish and LNB is because before this box I had a dreambox 500 and I was getting 99 SNR but when I checked my snr with this box it's 73 but I've plugged the dreambox back in and that's only 63 SNR now so I'll try the dish and LNB before removing the tuner. I think all the ABM settings are ok, my mates got a solo and I've used the same settings as him, I've tried sky England, Wales and Scotland and their all the same.

  11. #11

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2014
    Posts
    1,321
    Thanks
    612
    Thanked 418 Times in 270 Posts
    Quote Originally Posted by Needanalias View Post
    The reason i said I'd check the dish and LNB is because before this box I had a dreambox 500 and I was getting 99 SNR but when I checked my snr with this box it's 73 but I've plugged the dreambox back in and that's only 63 SNR now so I'll try the dish and LNB before removing the tuner. I think all the ABM settings are ok, my mates got a solo and I've used the same settings as him, I've tried sky England, Wales and Scotland and their all the same.
    Not sure if you're aware but for consistency when comparing SNR, use the same channel/frequency as there are numerous channels and some SNR's aren't as high as others due to satellite/transponder they are on.

  12. #12

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Ye sorry forgot to say it is the same transponder

  13. The Following User Says Thank You to Needanalias For This Useful Post:

    bbbuk (01-11-14)

  14. #13

    Title
    Junior Member
    Join Date
    Mar 2014
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 2 Posts
    I tried the same transponder again when the weather was a bit better today and I was getting 86 SNR but I was still getting the tuner lock timed out message, so I moved the dish a little bit which gave another 2-4% SNR and that fixed it. I wouldn't have thought that little bit would have made a difference but it did. Thanks for the help anyway.

  15. The Following User Says Thank You to Needanalias For This Useful Post:

    bbbuk (05-11-14)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.