Just did fresh rebuild to latest VIX 3.0.808 version on my Duo. When going into provider option, there are no sub-sections to allow the different bouquet options.
I this just on mine?
Can we get the old version back?
Go into the configure screen of ABM & change Setup mode to expert.
Thank youOriginally Posted by judge
I hadn't realised that was linked to the expert bit. Much apprecited
Anyone live in the south east uk want to earn a few quid setting up my duo running vix 3 or can any body send me a idiots guide to doing the lot
inc the obvious sly stuff
http://www.world-of-satellite.com/sh...ight=box+setup
and
http://openvix.co.uk/index.php?dir=G...d%20Tutorials/
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Thanks Pheonix
i started with the setup guide in your link i skipped the first bit as the box came from WOS flashed with the latest vix image and started setting up on my macbook and ran into a few issues with notepad++ not working on macbook
so final got free to air showing but when i green button the cam it says not configed in Etc/tuxbox/config but cam has tick next to it but no sly showing in epg
any ideas
Thanks
It's nothing to do with the cam, you need to look at the tuner configuration again and make sure it's correct. Then setup crossepg, run it auto scan. Reboot enigma2 by long press on power button and if you have done it correctly you will have full 28.2e aka sky 7 day listings..
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
hi thanks my tuner config is BCM7335 DVB-s2 NIM 28.2E Eutelsat 28a & astra 1n/2A/2F on both is that correct
If you have a cable from a 28.2 dish to each tuner input, yes correct.
Posting Permissions
