Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 29

Thread: Cool TV Guide by coolman

  1. #1
    grtmoby's Avatar
    Title
    V.I.P
    Join Date
    Mar 2010
    Location
    Egypt
    Posts
    1,575
    Thanks
    549
    Thanked 742 Times in 477 Posts

    Cool TV Guide by coolman

    I have found this and as said it works for both OR 1.5 and OE 1.6 this includes vti 2.0. The below are translated using G, so might sounds funny at some parts.

    All the thanks goes to Coolman


    Code:
    Cool TV Guide V2.0.2
    
    for OE 1.5 and OE 1.6
    
    green = all stations now run
    light blue = channel is selected
    blue = all channels
    red = recording
    
    "Pad"
    
    2 page vertical
    8 page down
    Four page links
    6 page right
    
    also switch and zapping to station without EPG! (einstellbar) (Adjustable)
    
    Pad with stitch as usual
    
    Reset to 5 and 0
    
    1 Zoom in
    3 Zoom out
    7 Switch 8 to 16-line display (adjustable)
    Switch 9 to 20 clock
    <Day -
    > Day +
    yellow = Bouquet (adjustable)
    red = Zap (adjustable)
    green = timer
    EPG Search blue = function (adjustable)
    OK = info channel (adjustable)
    HELP = Display all commands
    Channel + - = page by page quilt
    = Setup Menu
    
    I also made notes for Skinner, so you can install it easily smile
    
    in the setup:
    
    You can now show your own buttons ...since there never was an agreement
    
    the amount of your picons be adjusted automatically!
    
    and you can even left the distances and the number of your picons see the set you want!as Picon on and off!
    
    who has bouquets will be happy just with the setup ...
    Start On/Off set is the bouquet display at startup On / Off... but I think it is more practical to put his bouquet on a button ...
    since the plugin anyway remembers the position and the bouquet ...
    
    super cool is the EPG Search function ...Missed .. or already started?
    
    no problem .. Just press the blue button and you see directly where a repeat run!
    
    or you go to Info:
    even there you will find this EPG Search function ...
    
    enjoy it!
    
    
    Instructions:
    
    copy the ipk to the TMP and install
    
    16Guide.jpgHelp.jpgSetup.jpgCoolTVGuide.jpg
    Hope you enjoy it and find it useful...

    Discussion about this thread are to be placed here

    __________________________________________________ __________________________________________________ __________
    Last edited by grtmoby; 23-08-10 at 20:50.
    Nobody knows everything. We were born to help and aid each other... That's why we are all here, to share, teach and learn.
    Rules can be found HERE
    Support our sponsor World-Of-Satellite HERE


  2. The Following 7 Users Say Thank You to grtmoby For This Useful Post:

    basilyoung (23-08-10),bassethound (23-08-10),notanotherone (23-08-10),robason (24-01-14),Sicilian (23-08-10),terrorman (24-08-10),tomthebomb1968 (24-08-10)

  3. #2
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    Cool TV Guide VU+ V2.0.4

    Cool TV Guide VU+ V2.0.4

    for OE 1.5 and OE 1.6

    green = all stations now run
    light blue = channel is selected
    blue = all channels
    red = recording

    "Pad"

    2 page vertical
    8 page down
    4 left side
    6 page right

    also switchen and zapping channels with no EPG! (Adjustable)

    Pad with stitch as usual

    Reset to 5 and 0

    1 Zoom in
    3 Zoom out
    7 Switch 8 to 16-line display (adjustable)
    Switch 9 to 20 clock
    <Day -
    > Day +
    yellow = Bouquet (adjustable)
    red = Zap (adjustable)
    green = timer
    blue = EPG Search function (adjustable)
    OK = info channel (adjustable)
    HELP = Display all commands
    Channel + - = page by page quilt
    = Setup Menu

    I also made notes for Skinner, so you can install it simply

    in the setup:

    You can now show your own buttons ...
    since there never was an agreement

    the amount of your picons be adjusted automatically!

    and you can even left the distances and the number of your picons see the set you want!
    genause as Picon on and off!

    who has bouquets will be happy just with the setup ...
    set is the bouquet display at startup On / Off
    but I think it is more practical to put his bouquet on a button ...
    since the plugin anyway remembers the position and the bouquet ...

    super cool is the EPG Search function ...
    Missed .. or already started?
    no problem .. Just press the blue button and you see directly where a repeat run!
    or you go to Info:
    even there you will find this EPG Search function ...



    Instructions:

    copy the ipk to the TMP and how to install all plugins ...


    Thx to Coolman
    Attached Images Attached Images

  4. The Following 3 Users Say Thank You to bassethound For This Useful Post:

    elgeneral (24-08-10),grtmoby (24-08-10)

  5. #3
    jusaju

    Cool TV Guide V2.0.5

    Cool TV Guide V2.0.5 by Coolman

    For OE 1.5 and OE 1.6

  6. The Following 4 Users Say Thank You to jusaju For This Useful Post:

    baggio123 (02-09-10),bassethound (25-08-10),BuKandar83 (25-08-10),Sicilian (26-08-10)

  7. #4
    jusaju

    Cool TV Guide V2.0.6 by Coolman

    for OE 1.5 and OE 1.6

    green = all stations now run
    light blue = channel is selected
    blue = all channels
    red = recording

    "Pad"

    2 page vertical
    8 page down
    4 left side
    6 page right

    also switchen and zapping channels with no EPG! (Adjustable)

    Pad with stitch as usual

    Reset to 5
    Full Reset to 0

    1 Zoom in
    3 Zoom out
    7 Switch 8 to 16-line display (adjustable)
    Switch 9 to 20 clock
    <Day -
    > Day +
    yellow = Bouquet (adjustable)
    red = Zap (adjustable)
    green = timer
    blue = EPG Search function (adjustable)
    OK = info channel (adjustable)
    HELP = Display all commands
    Channel + - = page by page quilt
    = Setup Menu

    I also made notes for Skinner, so you can install it simply smile

    in the setup:

    You can now show your own buttons ...
    since there never was an agreement smile

    the amount of your picons be adjusted automatically!

    and you can even left the distances and the number of your picons see the set you want!
    genause as Picon on and off!

    who has bouquets will be happy just with the setup ...
    set is the bouquet display at startup On / Off
    but I think it is more practical to put his bouquet on a button ...
    since the plugin anyway remembers the position and the bouquet ...

    super cool is the EPG Search function ...
    Missed .. or already started?
    no problem .. Just press the blue button and you see directly where a repeat run!
    or you go to Info:
    even there you will find this EPG Search function ...
    You have to help you but the EPGSearch load of feed ...


    enjoy it!


    Instructions:

    copy the ipk to the TMP and how to install all plugins ...


    Attention at the request of many users:
    Cool TV Guide is not in the plugin folder!
    not listed under extensions ...
    it is called, in which you the info / EPG button presses long ...

    but would encourage anyone to install the multi Quickbutton plugin ...
    thus you can then e.g. Cool TV Guide with the e.g. Red Buttom directly call

  8. The Following 4 Users Say Thank You to jusaju For This Useful Post:

    baggio123 (05-09-10),Donnie (29-08-10),Sicilian (30-08-10),SLOTH (29-08-10)

  9. #5
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    Cool TV Guide V2.0.7 by Coolman

    by popular request I have you the Auto Timer

    placed on the green button

    just press the green button = Timer
    long press the green button = Auto Timer

    short press green = timer
    long press green = Auto Timer


    but would recommend to anyone who
    the multi Quickbutton VU + plugin modded by plnick to install ...
    thus you can then e.g. Cool TV Guide go directly to the red buttom!
    Just install and you have full access over your keyboard layout
    VTI also the panel, all plugins are already pre-configured for you by plnick ...
    for me a "must have" on every VU +

  10. The Following 2 Users Say Thank You to bassethound For This Useful Post:

    baggio123 (04-09-10),Sicilian (03-09-10)

  11. #6
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    Cool TV Guide V2.0.8 by Coolman

    long desired changes are now made mrburns

    the initial view of the 7-8 to 14-16 lines is now configurable

    kurzerote (Short Red) key = Zap (adjustable)
    langrote (Long Red) key = Zap + Exit

    Added is a NEW view

    Cool Single Guide

    short EPG / Info button = Single Cool Guide
    for EPG / EPG info button = Single
    Last edited by grtmoby; 06-09-10 at 18:01. Reason: bit of translation :)

  12. The Following 6 Users Say Thank You to bassethound For This Useful Post:

    baggio123 (06-09-10),Doctor Who (08-09-10),grtmoby (06-09-10),ols732 (11-09-10),Sicilian (06-09-10)

  13. #7
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    Cool TV Guide V2.0.9 by Coolman

    für OE 1.5 und OE 1.6

    grün = alle Sender die jetzt laufen
    hellblau = Sender der ausgewählt ist
    blau = alle Sender
    rot = Aufnahmen

    "Steuerkreuz"

    2 Seite hoch
    8 Seite runter
    4 Seite links
    6 Seite rechts

    auch switchen und Zappen auf Sender ohne EPG! (einstellbar)

    Steuerkreuz mit steppen, wie gewohnt

    Reset auf 5
    Fullreset auf 0

    1 Zoom hinein
    3 Zoom heraus
    7 Umschalten zwischen 7-8 und 14-16-zeiliger Anzeige (einstellbar)
    9 Switch auf 20 Uhr
    < Tag -
    > Tag +
    gelb = Bouquet (einstellbar)
    rot = Zap (einstellbar)
    langrot = Zap+Exit
    grün = Timer
    langgrün = Sendung automatisch zum Autotimer hinzufügen
    blau = EPG Search Funktion (einstellbar)
    OK = Info des Senders (einstellbar)
    Rec = Rec
    kurzEPG/Info = Cool Single Guide
    langEPG/Info = SingleEPG
    HELP = Anzeige aller Befehle
    Menu = Setup

    Ausserdem habe ich Anmerkungen für die Skinner gemacht, damit Ihr es einfach einbauen könnt smile

    im Setup:

    Ihr könnt nun Eure Tasten selber belegen...
    da es hier ja nie eine Einigung gab smile

    die Höhe Eurer Picons werden automatisch angepasst!!

    und Ihr könnt sogar die linken Abstände sowie die Anzahl Eurer Picons die Ihr sehen wollt einstellen!

    genause wie Picon ein und ausschalten!

    starte auf Kanal 1 (einstellbar)

    Fontgrösse, Spalten sogar die Timeline sind alle einstellbar!

    Startansicht wählbar zwischen 7-8 und 14-16-zeiliger Anzeige...

    wer Bouquets hat wird sich genauso über das Setup freuen...
    einstellbar ist auch die Bouquet Anzeige bei Start On/Off
    aber ich finde es ist praktischer sich seine Bouquets auf ein Button zu legen...
    da das Plugin sich sowieso die Position und das Bouquet merkt...

    Standart Picon Suchpfade:
    /usr/share/enigma2/picon/
    /etc/picon/
    /media/cf/picon/
    /var/etc/picon/
    /media/usb/picon/

    extra einstellbare Suchpfade:
    /usr/share/enigma2/coolpicon/
    /etc/coolpicon/
    /media/cf/coolpicon/
    /var/etc/coolpicon/
    /media/usb/coolpicon/

    super cool ist auch die EPG Search Funktion...
    Sendung verpasst.. oder schon angefangen?
    kein Problem.. einfach den Blauen Button drücken und Ihr seht direkt wo eine Wiederholung läuft!!
    oder Ihr geht auf Info:
    auch dort findet Ihr diese EPG Search Funktion...
    dazu müsst Ihr Euch aber noch das EPGSearch vom Feed laden...

    viel Spass damit!!


    Anleitung:

    das ipk ins TMP kopieren und wie alle plugins installieren...


    Achtung auf Wunsch mancher User:
    Cool TV Guide ist nicht im Pluginordner!
    also nicht unter Erweiterungen zu finden...
    aufgerufen wird es, in dem Ihr den Info/EPG-Button lange drückt...

    würde aber jedem empfehlen,
    das Multi Quickbutton VU+ Plugin modded by plnick zu installieren...
    somit könnt Ihr dann z.b. Cool TV Guide mit dem roten Buttom direkt aufrufen !!
    einfach installieren und Ihr habt den vollen Zugriff über Eure Tastenbelegung
    auch das VTI Panel, Plugins alles wurden schon für Euch von plnick vorkonfiguriert...
    für mich ein "must have" auf jeder VU+ großes Grinsen
    Multi QuickButton für VU+ Solo/Duo Version 2.7.3
    All PM,s asking about c/s on cable will be ignored and reported to forum staff!

  14. The Following 6 Users Say Thank You to bassethound For This Useful Post:

    canthackit (12-09-10),Sicilian (13-09-10)

  15. #8
    Coolman

    Thumbs up Cool TV Guide V2.0.10 by Coolman

    Cool TV Guide V2.0.10 by Coolman

    green = all stations now run
    light blue = channel is selected
    blue = all channels
    red = recording

    "Pad"

    2 page vertical
    8 page down
    4 left side
    6 page right

    also switchen and zapping channels with no EPG! (Adjustable)

    Pad with stitch as usual

    Reset to 5
    Full reset to 0

    1 Zoom in
    3 Zoom out
    7 switching between 7-8 and 14-16-line display (adjustable)
    Switch 9 to 20 clock
    < Day -
    > Day +
    yellow = Bouquet (adjustable)
    red = Zap (adjustable)
    long red = Zap + Exit
    green = timer
    longgreen = broadcast automatically to the autotimer
    blue = EPG Search function (adjustable)
    OK = info channel (adjustable)
    shortEPG / Info = Cool Single Guide
    longEPG / Info = SingleEPG
    HELP = Display all commands
    Menu = Setup

    I also made notes for Skinner, so you can install it easily


    at setup:

    You can now show your own buttons ...
    since there never was an agreement

    the amount of your picons be adjusted automatically!

    and you can even change the left distances and also the number of your picons to see the set you want!
    also set Picon on and off!

    Initial view can be set between 7-8 and 14-16 line display ...

    who has bouquets will be happy just with the setup ...
    set is the bouquet display at startup On / Off
    but I think it is more practical to put his bouquet on a button ...
    since the plugin anyway remembers the position and the bouquet ...

    standard Picon searchpath:
    /usr/share/enigma2/picon/
    /etc/picon/
    /media/cf/picon/
    /var/etc/picon/
    /media/usb/picon/

    extra searchpath:
    /usr/share/enigma2/coolpicon/
    /etc/coolpicon/
    /media/cf/coolpicon/
    /var/etc/coolpicon/
    /media/usb/coolpicon/

    so you can take extra picons maybe for the info bar and Cool TV Guide

    super cool is the EPG Search function ...
    Missed .. or already started?
    no problem .. Just press the blue button and you see directly where a repeat run!
    or you go to Info:
    even there you will find this EPG Search function ...



    enjoy it!


    Instructions:

    copy the ipk to the TMP and how to install all plugins ...

    Attention at the request of many users:
    Cool TV Guide is not in the plugin folder!
    not listed under extensions ...
    it is called, in which you the info / EPG button presses long ...

    but would encourage anyone to install the multi Quickbutton plugin ...
    thus you can then e.g. Cool TV Guide with the e.g. Red Buttom directly call
    Attached Images Attached Images
    Attached Files Attached Files

  16. The Following 13 Users Say Thank You to Coolman For This Useful Post:

    + Show/Hide list of the thanked

    baggio123 (18-09-10),bassethound (17-09-10),grtmoby (17-09-10),harryoz (26-09-10),Likvid (17-09-10),nedisared (18-09-10),pessottino (18-10-10),rytec (06-12-10),serg (20-09-10),Sicilian (17-09-10)

  17. #9
    koyote_0942's Avatar
    Title
    Member
    Join Date
    Aug 2010
    Posts
    47
    Thanks
    23
    Thanked 38 Times in 13 Posts

    Update auf Cool TV Guide V2.0.11 by Coolman

    Code:
    many improvements have been added
    
    e.g. more buttons adjustable, and the most important the IMDb Cool 3D
    
    yet I had about 600 lines of code, rewrite or alter ...
    
    only for the Cool 3D is worth to update itself
    
    Now you can you make the design yourself!
    
    You go to just the folder CoolEvent
    
    / Usr/lib/enigma2/python/Plugins/Extensions/CoolTVGuide /
    
    and changes the PNGs as you want it
    
    
    I have attached two pictures of the zombie skin added, so that your can see what is feasible

  18. The Following User Says Thank You to koyote_0942 For This Useful Post:

    baggio123 (27-09-10)

  19. #10
    soulmate
    you can't install this updated plugin on ViX image....at least not using the standard ipkg install method...

  20. #11
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    Update on Cool TV Guide V2.1.0 by Coolman

    Please uninstall all old versions V2.0 and reboot!


    this is not urgent ...
    but safe

    for the new Cool 3D I had to completely change the folder structure ...

    if you have the old version that is installed in a skin, which brings its own 3D Design
    and later uninstalled ...
    automatically are the PNGs were also be deleted
    and without PNGs, there is no 3D
    or no more standard view ...

    3D views / default view (selectable)
    so there are now at:
    / Usr/lib/enigma2/python/Plugins/Extensions/CoolTVGuide/Cool3D /

    3 new folders:
    Standard (default view)
    Skindesigner (so that skins can insert your own design)
    MyDesign (for your self-made designer)
    thus can now make each person has their own look easy

    and you can then setup between the different styles choose

    was added to a car function:
    if in a folder (eg Skindesigner) PNGs are not available, or the entire folder was deleted ...
    then it automatically falls back to the default folder!
    Thus, so Skinner can easily delete your 3D design is uninstalled again
    All PM,s asking about c/s on cable will be ignored and reported to forum staff!

  21. The Following 2 Users Say Thank You to bassethound For This Useful Post:

    BuKandar83 (30-09-10),Sicilian (29-09-10)

  22. #12
    andyblac's Avatar
    Title
    Administrator
    Donated Member
    Join Date
    Apr 2010
    Posts
    12,699
    Thanks
    2,607
    Thanked 11,096 Times in 4,733 Posts
    Quote Originally Posted by soulmate View Post
    you can't install this updated plugin on ViX image....at least not using the standard ipkg install method...
    it now in, and better, i have recoded it so it launches 3 times quicker
    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Release notes can be found in the About screen by pressing epg/info
    Rules can be found HERE - Support our sponsor World-Of-Satellite HERE

  23. #13
    yvessr's Avatar
    Title
    Member
    Join Date
    Jul 2010
    Location
    Flanders
    Posts
    42
    Thanks
    26
    Thanked 6 Times in 6 Posts
    Quote Originally Posted by andyblac View Post
    it now in, and better, i have recoded it so it launches 3 times quicker
    Hi @Andyblac
    ... seems fine; I also use VIX 1.1... can you please, share your modified ipk ?
    THANKS!

  24. #14
    pooface's Avatar
    Title
    V.I.P
    Join Date
    Jun 2010
    Posts
    9,731
    Thanks
    1,904
    Thanked 4,791 Times in 1,951 Posts
    Quote Originally Posted by yvessr View Post
    Hi @Andyblac
    ... seems fine; I also use VIX 1.1... can you please, share your modified ipk ?
    THANKS!
    Just do a software update...
    Rules can be found HERE
    Support our sponsor, World-Of-Satellite HERE
    Follow us on Twitter HERE
    -----
    Vu+ Ultimo (ViX Beta), Vu+ Solo (ViX Beta), CT ET9000 (ViX Beta)
    Dark Motor Superior with Inverto Ultra Black Twin LNB
    85cm Gibertini Aluminium Dish

  25. #15

    Title
    Senior Member
    Join Date
    Oct 2010
    Location
    Berkshire
    Posts
    9,697
    Thanks
    1,039
    Thanked 4,385 Times in 2,257 Posts
    i'm having trouble insalling ipk files how do you do it can you help or send me to the correct thread please

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.