Help please! Trying to get Tenda W150M to work with Sky box

[Donnie]

Guys I have no idea why you are having such problems but I set up 3 of these last weekend and 1 a few months back.

I used WPA2 (aes ) and it takes minutes to set up.

The ones at the weekend were for 2 DM800 's and a PS3

[Sicilian]

Mine worked when I first got it, but I had to reset it about 4 times in a week and then it finally stopped working alltogether.

I have tried re-setting it and gone through all of the setup rountines a dozen times but it just will not link.

My computer can see the Tenda and the Tenda can scan for and find my router but I cannot get out to the internet via the Tenda.

Check the networks settings of whatever you're connecting the tenda too, it looks like its not getting an IP address from your router. Have you set to DHCP?

I've zero issues with these, anyone have issues need to go through the setup guide step by step.

[gross1806]

Help please. New boy here and I'm trying to set up the Tenda box on my laptop, but when I input the 192.168.2.1 it comes up with a Belkin set up screen instead of the Tenda one. I have a Belkin wireless router in the bedroom where the broadband modem is.

No doubt doing something stupid but any help great fully received.

Thanks

[basilyoung]

I am not certain, as its been a while since i messed with the Tenda, but think the address should be 192.168.2.100

[gross1806]

Thanks.

I have managed to fix the problem, although I've no idea what I did differently.

[basilyoung]

well you are sorted, thats the bottom line, so happy days, well done,

[bmcdonagh]

Hi Guys,

I'm new here. I managed to set up a Tenda W150 box after a bit of messing around and have it connected to my SKY HD+ box in the living room. I then got another one to connect to the box in the bedroom and have now had some issues.

It all appears to be set up ok at my PC and connects to the internet ok however, there appear to be two main issues;

1) the WPS light on the box is not lit and when i press the WPS button at the side, the light flashes for a while and then goes out again!
2) I cannot seem to configure the IP/Gateway addresses on the second box - my PC tells me i cannot have more that one Default Gateway ( i set a default gateway for the first box) so it appears that i am lacking knowledge on how to set up a second box!

This is really frustrating, especially when there is very little support on the internet for these boxes.

I would really appreciate some help here please!

Thanks,

Brian

[olly]

Hi all i have now managed to setup my vu solo to work with the tenda,but for some reason the internet was working, but now stopped??
When i set up, in what menu can i have/change if poss to a different ssid,so i know what router my internet is connecting threw..Im wondering if this is causing the issues im having with the tenda having the same ssid name.
I take it my pc internet connection is threw my 02 router,or is it now going threw the tenda,as i do not know which router its using, as my internet connection says 02!!
Bit confusing the naming,security setup,followed everthing else quite easily.I did notice my o2 router has select channel AUTO,but can be changed to manual.Channel 6 selected when last checked on Auto??
Thanks all.

[olly]

All sorted,it connected after power down of routers,vu solo. Still learning!!

[paul362]

I just gave up with mine and went back to good old homeplugs (a lot less hassle and solid connections).

[mswin341]

I use my Tenda 150 set up to my sky box, works ok, the only problem I have is, my router is a BT inifity, and it changes the channel on my router automattically, so I have to keep changing the settings on the Tenda, is there anyway around this.