Solomend 800HD pvr/ Openbox S9 / Skybox S9 / Sathawk linux satellite boxes firmware.

[Data]

Use the link to download the latest firmware todate 8th Aug 2010 get a usb pen drive format it fat32 loaded the HDS2_DUMP.abs onto it. place in the box at the back via the usb port.go into the menu and update the firmware via usb. this will give you the latest firmware and a good freind Breed has dun us all a favour and sorted the channels into favourites and removed the tiresome channels that can cause us a bit of problem. if you use your own channels some sky sports channels cause a reboot loop. the quickest way to fix is pull the sat wire out reboot change channel then remove it from your fav's. pick another sky sports channels as there are normally doubles of every sky sports channels.

-http://www.megaupload.com/?d=YXQVVGTL

fill yur boots up

[planko]

That's july soft not august bro...

[Data]

you got a later software m8 can i have a link please?

[Sicilian]

You guys got some more info on there receivers? Capabilities, manufacturers website address?

[Data]

www.wydvb.com this is one site that make them.
www.sately.com this is another manufacturer.
These boxes are a very cheap alternative to the clone dm800. they look like a eurovox in size but the build quality is very good they will run cccam and mgcam with no problems. we know cccam runs ok as we have upgraded 12 boxes so far to these HD boxes. the menus look crap but hey the box works very well on cccam so who care what the menus look like. they run on a version of linux but not enigma. best description CHEAP & CHEERFUL!

[Sicilian]

So they're basically DM800 clones!?

[Data]

No nothing like them think of a freesat box running linux with some fancy software to get it to run cccam. no enigma on these boxes. but well built hd box.

[glenbrian]

Hi

I recently brought a Skybox DM800HD S9 box from china....do you know if they can be access by Web Interface, if so can you explain how to access the unit....it is set by DHCP and I can ping the IP Address but when I type the IP into the Web Browser (nothing?????) can you help

Brian
Australia

[basilyoung]

use firefox (webrowser)

baz

there is a lot more to these units...but been on the beer

[glenbrian]

Thanks Baz

With you saying that there is lot more to these boxes have you got any information or advice about the Skybox DM800HD S9 that i could communicate by email .

Once again, Thanks
Brian

[Data]

at the moment you cannot access the box via the web nterface. it is just a basic box.

[OldSkulRide]

these boxes dont have enigma2 and therefore no webinterface. They are just cheap hd boxes with custom firmwares.

[Mr. Mister]

Hi guys..
A friend of mine arrived at my house today with one of these receivers.. and he expects me to get it working for him..

Well. all i can say is what a night-mare.. Frimware update was fine.. no issues there.. then done a scan on 28E as thats all he is interested in.. Thats went fine also..

Got the config file in ok as well.. but ever since then it will not allow me to change channel.. its stuck on sky news.. and each time i try to change channel it just reboots..

Any suggestions on what i can do to cure this problem.. ??

Thanks

[Data]

the main problem with these boxes is on sky uk there are five channels tjat cause a reboot cycle. the quickest way to get out of it is to remove the sat cable then let it reboot then change channel then remove the ofending channel from your last scan. it is a problem with cccam and the firmware. it will get fixed. we all use a preformatted image with all the duff channels removed.

[Mr. Mister]

Got this up and running last night at about midnight..

First impressions are pretty good.. ok.. it will not act as server.. and it aint the prettyest flower in the bunch.. but for someone just wanting a second receiver in there house.. its perfect for that..