Help installing CCcam

[hansham]

Hi guys, I would like to install ccccam on my VU+SOLO.

ccccam is not available in the downloadable plugins menu.
cccam is available on the internet in six different formats.

I have tried this one, but if I do this, my VU+ stops at the startup screen:
1) S99-cccam.sh ---> etc/rc3.d/ : 777
2) K01-cccam.sh ---> etc/rc4.d/ : 777
3) CCcam ---> usr/bin/ : 755
4) keys ---> usr/keys/ : 644 (the directory usr/keys does not exist)
5) cccam.cfg ---> etc/ : 644
6) cccam.prio ---> etc/ : 644

...so that does not work...


- as tar.gz file... no idea what to do with that

- astar[1] file... no idea what to do
- a serie of .sh files... that is different from above:

Cccam_2.1.4
Cccam_2.1.4_cam.sh
CCam_2.1.4_nwecs_1.67_cam.sh
etcetera

shoot me.. I am lost here!!!

Help!


help!

[Sicilian]

Moved to Solo discussion.

Using this image your able to install CCcam via VTI panel http://www.vuplus-support.co.uk/show...10-USB-Drivers

[hansham]

Thanks!!!

I installed CCcam, but I saw no change.
Also not after reboot. I have a canaldigital member card in the slot and it is not recognized.

now what... :-(

[grtmoby]

guess u need to edit your cccam.cfg file so the card can be read

[hansham]

hahaha.. I really appreceate your help, but editing means I open the file in an editor........

....and then what.....

[grtmoby]

sorry, after more looking, canal digital card doesn't need any modification in the cccam.cfg file

it should be working on its own, may leave it a while so the card gets updated...

[basilyoung]

i have posted on your other thread, but need to know the encrption, to hope fully progress

baz


an after thought, i take it the card is in the reader slot chip down??

[grtmoby]

CD is on conax as i have found out from search

[basilyoung]

well thats that then...it simply should read

so as i posted, is the card in the reader chip down

or..is cccam activated??

[hansham]

well thats that then...it simply should read

so as i posted, is the card in the reader chip down

or..is cccam activated??

I have installed CCcam, but I did not see anything "happen".
I have tried my card both sides, since the VU+ manual does not explain how the card should be inserted (4 possibilities) so, It should be with the chip front and down?
so... cccam is.. I gues... "installed", but I have no Idea if it is "activated" and no idea how to do that.

[Sicilian]

Hansham, can you please keep your topic to one thread here to avoid confusion.

I replied here http://www.vuplus-support.co.uk/show...ight=#post9339

Reply back here if this helps or not.

Btw card goes in with chip facing down.

[hansham]

The card is in the slot for a few days now, so that does not help. When I look at the slot, the software says slot 1 is empty.
I will go to the shop with the card and have it checked.

[hansham]

Problem solved.
The shop owner who activated my Canal+ card forgot to tell me that Canal+ only sends the activation signal until 23:59h. After that I have to go to the website of the provider to re-activate the activation signal. And that day I was still setting up my dish.
So the days after that I connected my receiver, not knowing that there was no signal.
Yesterday I found this out by coincidence. I re-activated on the website, put my receiver on SBS-6 and after approx. 30 minutes the card became active.

But there is one issue: the VU+SOLO interface tells me that the card slot is empty, allthough my Canal+ card is in it and working. That is confusing.
Therefore I thought that I needed cccam as 'driver' to get my cardslot working, which is a mistake.

regards,

Hans

[Sicilian]

Did you ask where you purchased your card what encryption it uses?

[hansham]

This shop owner does not know these things.
I read on the internet it is irdeto of Mediaguard 3 from Seca. CD sends five codes per channel. Or is irdeto something else? This is not my field of expertise. I am a newbie in satelliteland and not a Linux wizard. (but I am learning)
On the forum sat-times.com I see all kinds of keycodes, but I have not figured out yet how to apply them. Can I do that with CCCam only or do I have to buy some expensive Diablo Cam module?