Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 14 of 14

Thread: German needs help about VIX Image and mediaplayer

  1. #1

    Title
    Junior Member
    Join Date
    Sep 2011
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    German needs help about VIX Image and mediaplayer

    Hallo,

    kennt sich wer mit den VIX Images aus? Habe das VIX 2.1.0 auf meiner Box und bin damit sehr zufrieden bis auf eine kleine Kleinigkeit. Wenn ich den Mediaplayer aktiviere und eine .ts Datei abspielen mochte, habe ich nur einen schwarzen Bildschirm. Auch mit dem emc 2.0.2 kann ich keine .ts abspielen. Nächstes Phenomen ist, wenn ich die Pausetaste betätige. Normalerweise soll denn da ein Standbild kommen und wenn ich wieder Pause drücke, sollte die Sendung weiter abspielen. Aber, wieder ein dunkler Bildschirm. Die Box kann ihr eigenes Aufzeichnungsformat nicht abspielen!

    Habe versucht herauszufinden, ob irgendein Plugin daran schuld ist. Habe jedoch festgestellt, dass dieses Problem erst dann auftaucht, wenn ich das Image aktualisiere. Wenn ich nämlich in die Erweiterungsverwaltung wechsele, wird angezeigt, dass 22 Updates für mein Images vorliegen. Eins von den Updates killt mir irgendwie den Codec. Kann das Update leider nicht separieren, um herauszufinden welches Update diesen Fehler verursacht.

    Schon jemand mit dem gleichen Problem? Vielleicht jemand nen Lösungsvorschlag?

    Gruß, Softcell.

  2. #2
    Stanman's Avatar
    Title
    Junior Admin
    Donated Member
    Join Date
    May 2010
    Posts
    11,284
    Thanks
    1,035
    Thanked 3,599 Times in 2,632 Posts
    You will get a better response if you can post in English as predominately our members are English speakers.

    We do have some German members and hopefully they can either translate your post or help you out.

    Support The Sponsor - Buy from the best HERE
    Please abide by the rules - have a read HERE
    VIX manual & guides >>HERE
    Download images from >> HERE
    New Box Setup Guide >>HERE

    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE


    Follow us on Twitter

    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM

    IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?



  3. #3
    belierzz's Avatar
    Title
    ViX Beta Tester
    Donated Member
    Join Date
    Dec 2010
    Location
    Germany
    Posts
    232
    Thanks
    191
    Thanked 50 Times in 34 Posts
    Hi,

    leider habe ich nur eine Uno, von daher nur bedingt aussagefähig. Trotzdem ein Tipp: flash mal Deine STB mit ViX 2.2.1xx. Dann passt das auch mit den Updates.

    For the English: suggested update to latest ViX as Softcell is running on 2.1.0 and gets .ts playback issues after online update.

  4. The Following User Says Thank You to belierzz For This Useful Post:

    Stanman (11-09-11)

  5. #4

    Title
    Junior Member
    Join Date
    Sep 2011
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks for replay

    @ belierzz

    hab mit der aktualisierungsfunktion ja die komplette FW aktualisiert. Sobald aktualisiert ist, steht die komplette FW ja im Prinzip auf 2.2.1 und dann geht leider nichts mehr

    Werde aber mal flashen wie vorgeschlagen. Erstmal thx für deinen Tipp.

    P. S.

    Sorry folks, but my english is very terrible. I can´t explain my probs in english.

  6. #5

    Title
    Junior Member
    Join Date
    Jun 2011
    Posts
    11
    Thanks
    9
    Thanked 1 Time in 1 Post
    Hi,

    vielleicht eine blöde Frage: Hast Du mal versucht, die Filme über die "Filelist"-Taste aufzurufen, also nicht über den Media Player?

    Gruß

    Question about how the media files were opened.

  7. #6

    Title
    Junior Member
    Join Date
    Sep 2011
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi, VincentVegas,

    na klar hab ich das versucht.

    1. spielt er dann AVI ab (je nach dem welches Containerformat)
    2. habe ich nachher das EMC 2.0.2 aufgespielt, das macht das gleiche wie Play über die Filelist

    Das .ts Format ist dem Receiver aber gänzlich fremd. Wie schon erwähnt klappt das Timeshift auch nicht. Sobald man Pause drückt, ist es dunkel. Beim Fortsetzen des Programms passiert das gleiche. Nichts.

  8. #7
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Moved into new German section
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  9. The Following 2 Users Say Thank You to Sicilian For This Useful Post:

    bassethound (14-09-11),Larry-G (14-09-11)

  10. #8

    Title
    Junior Member
    Join Date
    Sep 2011
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    @ Stanman:

    I flashed the VIX 2.1.0 image on my box. Then i have updatet it with the receivers menue. After this update i can´t play any .ts file. Same Prob with timeshift. When i push the pause button i have an black screen. On resume i have a black screen too.

    So that is the problem i have. The VIX image is very good image, but i can´t play any recorded file.

  11. #9
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,258
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Das einspielen vom EMC ist eine schlechte Idee! Die fügt absolut nichts zu an die bereits vorhandene Funktionalitäten. Und dazu "hackt" sie auch noch einige Sytemdateien (was auch beim de-installieren nicht völlig angetan gemacht wird").

    Im ViX ist die "Movielist" alles was man zum abspielen braucht.

    PS: Ist die HDD richtig gemount? Was sagt die MountManager?

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  12. #10

    Title
    Junior Member
    Join Date
    Sep 2011
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    danke für den Tipp, aber ich habe das Problem ja auch schon wenn EMC nicht drauf ist. Alleine das Updaten reicht schon, dass die Box keine .ts mehr abspielt. Ich kann ja avi und mpg abspielen. Die Festplatte ist richtig gemountet. Zeigt das System wenigstens an. Habe jetzt das alte Image wieder drauf, mit EMC aber halt nicht geuppt. Seitdem läuft der Player. Nur fehlen mir einige Futures die im Update drinn sind. Update nutzt mir ja nix, wenn ich anschliessend die aufgenommenen Videos nicht anschauen kann.

  13. #11
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,258
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Da wir von diese Problem noch niet gehört haben, seht es aus das deine Box (welche ist das übrigens?) ein seriöses Problem hat. Ich würde die mal neu flashen. Wann du zuerst mal eine SettingsBackup macht, ist die Box schnell wieder da, aber nicht die Plugins zurück setzen. Schau nach dem Flash zuerst mal an ob die Box funktioniert, danach könntest du langsam die erwünschte Plugins installieren (und bitte nicht de EMC: was beobachtest du damit eigentlich?).

    Übrigens: die Codec sind im Hardware: damit kann also nichts Los sein.

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  14. #12

    Title
    Junior Member
    Join Date
    Sep 2011
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    sorry, hab die Crake Tech et 9000, aber das neue Modell CT 9100. Ist hardwaremässig die gleiche Box, nur andere FW.
    Mit dem EMC (Enhanced Media Center) ist der Playermodus komfortabler. Aber auch wenn ich das EMC nicht installiere, kann der
    Receiver nach Update keine ts abspielen

  15. #13

    Title
    Senior Member
    Join Date
    Apr 2011
    Posts
    122
    Thanks
    33
    Thanked 149 Times in 49 Posts
    German Corner=very nice

    Was kann keine .ts abspielen.
    Sehr merkwürdig auch nicht mit dem EMC?
    Hast du die .ts irgendwie vorher umgewandelt?
    Mit einem Programm oder so.
    1x Et9000
    1x Et9200
    1x Dm 8000

  16. #14
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,258
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Quote Originally Posted by softcell View Post
    sorry, hab die Crake Tech et 9000, aber das neue Modell CT 9100. Ist hardwaremässig die gleiche Box, nur andere FW.
    Welches Image hast du darauf?

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.