PDA

View Full Version : MY Flash doesn not work!!???



iss_matrix
17-05-11, 20:35
Hello,

I have bought a VU+ Solo. I have tried to Flash the the Reciever but I fail to do so. Plz help me.

What I do is:

1. Switch of the Plug
2. Plug in the USB Stick with vuplus/solo/ and the three files on the Stick at the front side
3. Than turn the Plug on
4. Red light appears
5. After 2 sec. the red light disappears and no light appears on the front
6. After 7 mins nothing happens

So I cancel all, and come back to normal mode with the old Image Experimental 2010-07-27

So where I'm wrong

If I try another USB Stick the Reciever doesn't do anything it starts as nothing was in the USB Slot in the Front!!

PLz Help

Plz help

Thank You!

punisher
17-05-11, 20:46
have you formatted the usb in FAT32?

Stanman
17-05-11, 22:35
Have a read of this mate.
http://www.world-of-satellite.com/showthread.php?1148-How-to-flash-your-VU-Solo-with-USB-stick

iss_matrix
18-05-11, 05:00
Hello,

first of all Thanks for the reply! :-)

I have formatted three different USB Sticks with FAT32.

Yes I have red the link and no solution sounds to fit.

Sorry!

I have not any problem similar to mine!

Sicilian
18-05-11, 05:17
Make sure you have formatted FAT32, the flash files are in the root of your usb stick and try another usb stick.

Alias1
18-05-11, 06:05
Try a different USB port

Donnie
18-05-11, 08:51
Make sure you don't have anything else in the rear USB slot.